Lumines

End cap for LUMINES X LED profile, white ABS, with cable hole, 12-0081-00

Name: End cap for LUMINES X LED profile, white ABS, with cable hole, 12-0081-00
Brand: Lumines

A white ABS end cap for the LUMINES X LED profile, in the version with a hole for the supply cable. The manufacturer's catalogue number is 12-0081-00. What an end cap is for An aluminium profile cut to length is left with two open ends: the LED tape, the adhesive, the wiring and the raw sawn edge are all on show. The cap closes that section — and does three things at once. It hides the cutting marks no saw completely avoids. It keeps dust out of the profile, where it settles on the tape and dims the output over time. And it mechanically locks the cover, which without closed ends can slide out of its channels. The hole is for the cable, not decoration This version has a hole for the supply cable. The driver for a LUMINES X profile sits outside the profile, so the cable has to get out somewhere — and it comes out through this hole, at the end of the run on whichever side the driver stands. That keeps the cable from poking out sideways or being pinched under the cover. In practice this gives a simple buying rule: one length of profile needs two caps — one with a hole on the supply side and one without a hole at the other end. The manufacturer offers both in the same colour and material, plus a third variant with a scored knock-out hole, a pre-marked disc you break out on site if it turns out during installation that the cable leaves from the other end. It fits the X profile and nothing else End caps are not universal. Every LUMINES profile has its own section and its own cap catalogue number — 12-0081-00 fits the LUMINES X profile and only that one. A cap from the U, W or V profile simply will not go in. It is worth checking before ordering, because the numbers differ by a single digit. LUMINES X is a compact surface-mounted profile with a rectangular section, intended for LED tape in awkward places — in furniture, in interior finishes and in suspended installations. It emits perpendicular to its base and comes in 1.0 / 2.02 / 3.0 m lengths, or to order up to 6 m. Material and colours This cap is ABS plastic — hard, rigid and impact resistant, the same material electronics housings are made from. It is a push fit: no screws, no adhesive. LUMINES offers profile end caps in two materials and several colours: ABS — white, black, grey, lacquered silver, inox and gold RAL 1923 Aluminium — silver, white, black A cap is usually matched to the profile's own finish; the aluminium version costs more, but against an anodised profile it gives a more coherent edge than plastic does. Specification Manufacturer: LUMINES Lighting Catalogue number: 12-0081-00; EAN 5901854775357 Type: LED profile end cap, version with a hole for the supply cable Fits: LUMINES X LED profile (surface-mounted, rectangular) Material: ABS plastic Colour: white Fixing: push fit Contents: 1 pieceVisa mer

från 6,25 kr

1 erbjudande

Visa erbjudanden