Mareco Luce

Mareco Luce PIN 360 dove grey LED wall and ceiling light 24 W 3000/4000 K with sensor and emergency module

Name: Mareco Luce PIN 360 dove grey LED wall and ceiling light 24 W 3000/4000 K with sensor and emergency module
Brand: Mareco Luce

Mareco Luce PIN 360 is a round, dove-grey surface light designed for either ceiling or wall installation. This version combines integrated LED lighting with a presence sensor and an emergency module. It therefore addresses circulation areas and entrances where light needs to respond without someone reaching for a switch.A choice of 3000 or 4000 KThe built-in LED module consumes 24 W, and its driver is integrated into the fitting. A CCT switch allows warm white 3000 K or neutral white 4000 K to be selected during setup. Mareco Luce specifies 2280 and 2489 lm respectively, so the chosen colour temperature also affects the stated output of the luminaire. The light source is included and there is no separate bulb or lamp holder to select.The sensor version incorporates a dimmed stand-by light function. It can respond to presence while retaining a low orientation level outside active detection. If the mains supply fails, the emergency module provides operation for 3 hours. These two functions identify this particular PIN 360 configuration and are not standard on every model in the family.A housing made for moisture and impactThe body is made from thermoplastic material. A self-coloured ABS base supports a translucent, UV-stabilised polycarbonate diffuser, spreading the light across the broad circular face. An IP65 rating protects the internal components against dust and water jets, while IK08 impact resistance is useful where an accidental knock is possible.Mareco Luce also specifies suitability for saline environments. This matters at entrances, on covered terraces and in buildings near the coast, where damp, salty air can place additional stress on ordinary materials.Dimensions and installationPIN 360 measures 360 mm in diameter and 80 mm deep. Its low profile allows it to work as a ceiling light or wall light without projecting far from the mounting surface. It is designed for a 220–240 V, 50/60 Hz supply and is a Class II fitting.Before installation, the colour temperature should be selected and the sensor settings planned in accordance with the instructions. In a bathroom, hallway, passage or entrance, the combination of automatic response, orientation lighting and three-hour emergency operation reduces the need for separate devices in the lighting layout.Show more

from 172,28 €

1 offer

See all offers