Bergmen

End cap for power connection with side cable outlet for BERGMEN Neon Flex HS

Name: End cap for power connection with side cable outlet for BERGMEN Neon Flex HS
Brand: Bergmen

A white end cap that closes the end of a BERGMEN Neon Flex HS run where the power supply is connected. It has an opening for the cable, which leaves from the side rather than along the line of the strip.Which strip it fitsThe cap is made for the Neon Flex HS series — horizontally bending neon with a flat face, a 10 × 18 mm cross-section and a 24 V DC supply. It does not fit Bergmen neon from other series with a different cross-section, so check that your strip is HS when ordering.Side outlet or another typeThe cable leaves the cap from the side, at right angles to the strip. In the same series the manufacturer also makes a cap with a straight outlet, one with a bottom outlet that takes the cable straight down into the surface beneath the strip, and a solid end cap with no opening to close the far end of the run. Choose the variant according to where the supply cable reaches the installation point.What is in the boxYou get the cap only. The manufacturer sells the supply cable and silicone adhesive separately, so order them together with it. The manufacturer gives a 36-month warranty on the cap.Show more

from 0,77 €

1 offer

See all offers