WoodMan MEXICO Reclining Beech Armchair Walnut Cream WUA-00818

Name: WoodMan MEXICO Reclining Beech Armchair Walnut Cream WUA-00818
Brand: WoodMan

MEXICO is an armchair on a solid beech frame finished with linseed oil and wax in a walnut tone. A futon sewn from cream polyester fabric and buttoned through sits on the frame. The backrest drops flat, turning the chair into a level lounging surface. How much floor it takes and how much it gains when opened The chair is 75 cm wide and 105 cm deep, and with the backrest lowered it grows to 140 cm. Those 35 cm have to stay free behind the piece, or it must be movable away from the wall first. Seated, the back reaches 83 cm above the floor, and the legs lift the body by 17 cm, so there is a gap underneath to compare with your own vacuum head. How it sits and how it lies The seat is 45 cm high and 65 cm deep, so you sit with your legs drawn up rather than upright; sitting back against the rest calls for a cushion. The armrests end 60 cm above the floor — 15 cm above the seat, lower than the 20–25 cm at which a forearm rests freely. With the back lowered the mattress forms a flat surface of 65 × 140 cm. That is noticeably shorter than a standard bed, so compare the 140 cm with the height of whoever will use it. The maker states a permissible load of 130 kg. What it is made of The frame is solid beech treated with linseed oil and wax — an oiled rather than lacquered finish, so the grain stays palpable. The mattress has a polyester fabric cover and a polyester fibre filling, and the maker sews it in ten colours — this one is cream. The cover comes off but must not go in the washing machine. Assembled, the chair weighs 39.1 kg — worth knowing before carrying it up stairs. What arrives in the packages and how it goes together It ships in two packages: the frame in a 96 × 70 × 19 cm carton at 31 kg, the mattress in a polyethylene bag with a non-woven cover, 70 × 67 × 40 cm and 9.1 kg. One person is expected to assemble it; instructions and an assembly tool are included. From your own tools you need a hammer and flat and cross-head screwdrivers; a cordless driver with an S4 bit is also recommended.Meer tonen

€ 751,56

vanaf € 601,25

1 aanbieding

Bekijk aanbiedingen