V-TAC

V-TAC VT-7657 black garden bollard light 36.5 cm IP65 E27 lamp excluded SKU 23353

Name: V-TAC VT-7657 black garden bollard light 36.5 cm IP65 E27 lamp excluded SKU 23353
Brand: V-TAC

V-TAC VT-7657, SKU 23353, is a black garden fitting shaped as a low rectangular bollard. Exact EAN 3800170218635 confirms the 23 × 23 × 36.5 cm version with one E27 lampholder and IP65 protection. A lamp is not included, so colour, output and actual energy use depend on the selected source. Open metal slats screen the light and form a vertical pattern around the fitting. Replaceable E27 lamp up to 60 W One standard E27 lampholder sits inside the enclosure. The instruction for model 23353 specifies a maximum of 60 W and clearly states that the lamp is not included. An LED source can therefore be chosen for the required brightness, colour and distribution, provided it stays within the fitting limit and fits beneath the cover. Installing a 4000 K, RGB or other E27 lamp changes the resulting light accordingly. 36.5 cm high with a 23 × 23 cm base The body has a square 23 × 23 cm footprint and stands 36.5 cm high. This scale suits a terrace, path, entrance or planted border without creating a tall post. Black vertical slats limit the direct view of the lamp and cast repeated shadows, so source shape and position affect the final pattern. Net weight is 3.4 kg. A terrace view has been selected as the supporting image to show scale and distribution. Iron body with IP65 outdoor protection V-TAC states that the body is made of iron and finished in black. IP65 means dust-tight construction and protection against water jets, but not immersion or water permanently pooling around the base. Install the fitting on a stable, level and drained surface prepared for safe cable entry. Opening its cover allows the E27 lamp to be replaced later without removing the complete bollard. Always isolate power before handling the source and allow a hot lamp to cool. 200–240 V and four-anchor mounting VT-7657 operates at 200–240 V and 50/60 Hz. Its instruction shows the base fixed to the ground with four expansion anchors and the live, neutral and protective-earth conductors connected inside. Earth continuity must be retained for the metal housing. Drilling, cable-entry sealing and fixed electrical connection should be completed by a qualified installer after isolating the circuit. V-TAC provides a two-year warranty. When choosing a lamp, consider not only wattage but also operating temperature, suitability for the intended outdoor conditions and physical dimensions that fit inside the enclosure.Meer tonen

vanaf € 70,79

1 aanbieding

Bekijk aanbiedingen