NORLYS

Halmstad 212GA bollard light 26 cm, hot-dip galvanised, with E27 LED bulb 2700 K NORLYS

Name: Halmstad 212GA bollard light 26 cm, hot-dip galvanised, with E27 LED bulb 2700 K NORLYS
Brand: NORLYS

Halmstad 212GA is a low bollard light, 26 cm tall: a square steel body with an opal diffuser at the top behind horizontal louvres. The steel is hot-dip galvanised and left in its natural matt zinc colour, unpainted. A dimmable E27 LED bulb is included.Where it goes and how it is fixedAt 26 cm tall the bollard lights just above the ground — the edge of a path, steps or a border — without dazzling people walking past. The diffuser is partly shielded from above, so most of the light goes sideways and down onto the surface. IK10 impact resistance is the top grade on that scale, which matters for a fitting beside a driveway or in a mower's path.The base is fixed with three bolts through ø9 mm holes set 120° apart on a ø65 mm circle. A concrete anchor (205), a ground anchor (206) and mounting adapters are sold separately to suit the ground. The terminals take conductors up to 3 × 2.5 mm², and the gland a round cable up to 12.5 mm in diameter. The fitting is protection class II, so it needs no earth conductor, and IP65 lets it stand outdoors with no cover at all.Bulb and lightThe box contains a Philips MASTER LEDbulb 5.9 W E27 in A60 shape giving 806 lm — as bright as an old 60 W bulb — at 2700 K, a warm, slightly yellow light. A CRI of 80 is enough for lighting paths and a garden. The bollard is phase-dimmable with a trailing-edge (TE) or leading-edge (LE) dimmer.The user replaces the bulb; a replacement needs an E27 cap and an A55–A60 shape, because a larger bulb will not fit under the diffuser. The manufacturer rates the supplied bulb at more than 25,000 hours.Mostra di più

da 334,63 €

1 offerta

Vedi le offerte