sE Electronics DM2 TNT Inline Microphone Preamp, Switchable +15 or +30dB Gain, Black

Name: sE Electronics DM2 TNT Inline Microphone Preamp, Switchable +15 or +30dB Gain, Black
Brand: sE Electronics

The sE Electronics DM2 TNT Black is an active inline microphone preamp in a black finish, designed to sit between your dynamic or ribbon mic and your preamp, mixer, or interface. With selectable gain (+15dB or +30dB) and switchable impedance, it provides precise control over signal level and tonal character. Powered by standard 48V phantom power, an essential tool for getting the best out of low-output microphones.+15dB / +30dBGain Settings · SelectableSwitchableImpedance · Optimise for your mic48VPower · Phantom poweredWhy Use an Inline Preamp?Dynamic and ribbon microphones often have low output levels that push budget preamps and interfaces into their noisy upper gain ranges. The DM2 adds clean gain before the preamp stage, keeping your signal well above the noise floor. Its eight switchable load settings, from 50 ohms to 10 megohms, let you match the input load the DM2 presents to your particular mic.FeaturesTwo selectable gain modes: +15dB for moderate boost, +30dB for low-output ribbonsSwitchable impedance to shape mic response and tonal characterInline XLR design, plugs directly between mic and preamp/mixerPowered by standard 48V phantom power, no batteries requiredIdeal for dynamic and ribbon microphones needing extra clean gainReduces noise floor on budget preamps and interfacesBlack finish for a clean, unobtrusive look on stageCompatible with DM ProClip mounting accessoryNoteRequires 48V phantom power from your mixer, interface, or stage box. For passive dynamic and passive ribbon mics only; not for condenser or active ribbon microphones.SpecificationsTypeActive inline microphone preampGain+15dB / +30dB (selectable)ImpedanceSwitchableConnectionInline XLR (male to female)Power48V phantom powerFinishBlackSKUDM2 BLACKShow more

£129.00

from £96.00

1 offer

See all offers