Polymaker

Polymaker PB01003 3D printing material Polyethylene Terephthalate

Name: Polymaker PB01003 3D printing material Polyethylene Terephthalate
Brand: Polymaker

PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. What is PETG? If we had a simple axis going from 'low durability but easy to print' on the left to 'high durability but challenging to print' on the right.PLA would be in the far left, ABS would be in the far right and PETG would be exactly in the middle.Printing temperature: (PLA+ABS)/2Heat resistance: (PLA+ABS)/2Strength: (PLA+ABS)/2Feel free to check our TDS below for more scientific information. Printing and Drying Settings? Printing Temperature: 230C - 240CBed Temperature: 70C - 80CPrinting Speed: 30mm/s - 50mm/sFan: 20%Direct Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 65C for 6h(Only if the material has absorbed moisture) Do I need to use the cooling fan with PETG? Yes if you are looking for nice surface finish.No if you are looking for strong and durable parts.20% ON if you want the best of both worlds. Weight & dimensions Weight: 1 kg Thickness: 1.75 mm Packaging data Quantity per pack: 1 pc(s) Features Printing material: Polyethylene Terephthalate Glycol (PETG) Printing colours: Grey Colour name: Grey Hex colour code: 91999FVis mere

fra 347,59 kr.

1 tilbud

Se tilbud