Lumines

LUMINES SONO Recessed Plaster-In LED Profile, White Lacquered Aluminium, 2 m

Name: LUMINES SONO Recessed Plaster-In LED Profile, White Lacquered Aluminium, 2 m
Brand: Lumines

A triangular profile that emits at an angle SONO differs from an ordinary LED profile in one respect: its cross-section is triangular, and the diffuser does not lie parallel to the surface but at an angle. As a result the light does not go straight down but directionally — it grazes a wall, a cabinet or a worktop instead of lighting the space beneath. This is a profile for washing surfaces, not for general lighting. Recessed and plastered in — it disappears into the ceiling SONO installs flush, to be plastered in, in a ceiling or a wall. Once the filler is finished, only the slot with its diffuser remains visible — no frame, no housing, no visible body. The diffuser also sits deep within the profile, which limits glare (UGR): looking along the line of light you see the lit surface, not the diodes. This variant: white lacquered, 2 m This article is the profile in white lacquer, 2.02 m long (manufacturer code 10-1141-20). SONO also comes in black, silver and raw, and in 1 m and 3 m lengths, with up to 6 m to order. Worth checking before buying: the profile cannot be joined, so the length of the line of light has to be achieved in one piece rather than assembled from shorter ones. What else is needed The profile is an aluminium extrusion — it does not light on its own. A complete build needs a diffuser (BASIC range: clear, frosted, opal, frosted-opal or black), an LED tape, end caps with an aperture, and a driver mounted outside the profile — SONO has no room for one inside. All of these are bought separately. Conditions of use The profile cannot be sealed — it is rated IP20, so dry interiors only. The aluminium also works as a heatsink: an LED tape stuck directly to the base of the profile sheds its heat into the metal, which measurably extends its life compared with tape stuck to plasterboard. Product data Manufacturer: LUMINES Lighting; SONO system; code 10-1141-20 EAN: 5904405935675 Type: recessed LED profile, plaster-in (ceiling or wall) Cross-section: triangular; directional light distribution Length: 2.02 m; cannot be joined Material: aluminium; finish: lacquered, white Ingress protection: IP20 — dry rooms Driver: mounted outside the profile Not included: diffuser, LED tape, end caps, driverTöbb megjelenítése

20 034 Ft-tól

1 ajánlat

Ajánlatok megtekintése