Maytoni

T-connector for recessed track UNITY TRA002CT-11W Maytoni

Name: T-connector for recessed track UNITY TRA002CT-11W Maytoni
Brand: Maytoni

TRA002CT-11W is a T-shaped connector for the single-phase recessed UNITY track. It joins three track runs at right angles and carries the supply across the junction, so the branch is fed from the same connection as the main run. The housing is aluminium finished in white, matching the Unity track profiles. Size and where it goes in the run The connector measures 13 cm long, 9.5 cm wide and only 2 cm high, so once installed it sits as flush with the ceiling plane as the track itself. Its three outlets create one branch point: two sections continuing in a straight line and a third leaving at ninety degrees. That layout is used where a run above a hallway or along a wall has to turn into the room — over a kitchen island, a dining table or a counter. The connector is fitted into the line of the recessed track and its three side plates screw down onto the profile ends. At 0.1 kg it adds no meaningful load to a suspended-ceiling frame. Supply and protection class The connector works on a 220–240 V, 50 Hz supply and carries the single-phase Unity conductors through the whole junction, so the branch needs no separate feed of its own. It is built to protection class II, meaning double insulation — no separate earth conductor has to be connected at this point. Build and its place in the Unity system The aluminium body is plain and undecorated; from below only the heads of the screws holding the cover plates remain visible. It is a technical part, designed for installations where the track disappears into the ceiling plane and only the spotlights are meant to be seen. TRA002CT-11W is a system accessory rather than a luminaire — the tracks, the power feed and the Unity spotlights are chosen separately and must come from the same single-phase version of the system. The manufacturer covers this part with a five-year warranty.Show more

from 13,00 €

1 offer

See all offers