Maytoni

X-connector for track UNITY TRA001CX-11W white Maytoni

Name: X-connector for track UNITY TRA001CX-11W white Maytoni
Brand: Maytoni

TRA001CX-11W is an X-connector for the single-phase Maytoni track from the Unity system. Four arms leave the square body at right angles: the connector joins four track sections at one point and carries the current between them. The housing is white plastic, matching the white version of the Unity track; the same part in black is TRA001CX-11B.How much room it takes and how it is fixedIn plan the connector is a square of 11 × 11 cm, 23 mm high, weighing 0.06 kg. That is the area to keep clear exactly at the crossing point — when you draw the track grid on the ceiling it is worth marking this square straight away, because moving the junction later means cutting four track sections instead of one. The cross takes the track out of one point in two perpendicular directions, giving a plus-shaped run rather than a single line.The photographs show that each of the four arms has its own clamping screw and a metal contact that slides into the track channel. The manufacturer states surface-mounted and pendant mounting, the same as for the Unity track itself.Which system it belongs to and how it is fedThe connector belongs to the single-phase Unity system and works only there — track from another system has a different profile and a different contact layout, so parts are not moved between systems. The connector itself has no mains inlet: in Unity a separate part brings the supply in, while the cross joins the sections and passes the voltage on.The part runs on 220–240 V at 50 Hz. Protection class II means double insulation — no protective earth conductor is taken to the connector.Show more

from 13,00 €

1 offer

See all offers