Aldex

White Aldex BOT CEILING 2×2 ceiling light 4×GU10-AR111 100 cm 1046PL_L1

Name: White Aldex BOT CEILING 2×2 ceiling light 4×GU10-AR111 100 cm 1046PL_L1
Brand: Aldex

Aldex BOT CEILING 2×2 WHITE 1046PL_L1 is a matt-white ceiling light with four adjustable spot heads on a 100 cm rail. Its metal body accepts four replaceable GU10 ES111 LED lamps, each rated at no more than 10 W.Four spotlights adjusted independentlyThe long, slender rail carries four cylindrical heads: two placed towards each end, leaving an open interval in the centre. Every spotlight sits on a movable joint, so its direction can be set independently for several zones, pictures, shelving or a work surface. Aldex describes the layout as a symmetrical 2×2 arrangement and presents it as a quiet modern design. A matt-white coating softens the technical shape of the metal structure and allows it to sit discreetly against a light ceiling. Overall dimensions are 100 cm wide, 15.5 cm high and 11.5 cm deep, while each of the four heads is 11.5 cm in diameter.4×GU10 ES111 with a choice of light outputEach head accepts one replaceable GU10 LED lamp in the ES111 format, with a maximum input of 10 W. The fitting therefore provides four separate light points. Aldex does not prescribe colour temperature, lumen output or beam angle; those properties come from the lamps selected by the buyer. Warm light can suit a relaxation area, neutral light can support a task zone, or a narrower beam can create an accent, provided the chosen lamp meets the luminaire’s requirements. The four bulbs are not supplied and must be purchased separately. Documentation does not identify a built-in dimmer. Any dimming capability depends on compatibility between the GU10 lamps and the electrical installation, so that function should not be assumed until both components have been checked.Metal construction and professional installationThe package contains the complete white metal BOT fitting with its ceiling rail, four adjustable heads and four GU10 lampholders. It does not contain the four ES111 bulbs. The current instruction shared by models 1046PL_L1 and 1047PL_L1 illustrates three rail fixing points, conductor connection and final insertion of the light sources. Wiring must follow the markings on the particular unit and the requirements of the local installation. The documents do not confirm fixings suitable for every ceiling substrate or any additional control equipment. Appropriate anchors must therefore be chosen for the supporting material. Work starts with the circuit isolated, and electrical connection plus the final operating check should be completed by a qualified electrician.Show more

from 123,75 €

1 offer

See all offers