NORLYS

Bollard Light NORLYS Egersund 5067GR graphite RAL 7016 LED 21.9 W 4000 K 63 cm DALI2

Name: Bollard Light NORLYS Egersund 5067GR graphite RAL 7016 LED 21.9 W 4000 K 63 cm DALI2
Brand: NORLYS

Egersund 5067GR is a bollard light 63 cm high and 20 cm in diameter, made of cast aluminium powder-coated in graphite grey RAL 7016. The head is a clear PMMA cylinder under a flat cap, and a conical reflector inside it spreads the light evenly all around the bollard.How much light, and what kindThe 18 W Cree LED module produces 2655 lm, and 1782 lm leaves the complete fitting at 21.9 W input — 81.4 lm/W and energy class C. That is enough light to illuminate a path together with its surroundings, not just to mark its line. 4000 K is neutral white, and CRI 80 is standard colour rendering of paving and plants.The distribution is rotationally symmetric, so the bollard does not need to face the path. The BUG rating is B1-U3-G1 — figures to check where the site owner limits light directed at the sky.DALI2 control and serviceThe driver works on DALI2 with NightDim (4DIM) and is factory-programmed for maximum current. Brightness is set from a DALI controller, not with an ordinary wall dimmer; other settings, such as a reduced output in the middle of the night, are programmed by Norlys after agreement with its sales department.The LED module and driver are replaced only by a professional service, using repair kit ZS5067zx0010. The manufacturer states a module lifetime of 102,000 h (L80, meaning 80 % of the initial flux remains after that time) and 100,000 h for the driver.Installation and connectionCompare the 63 cm height with the plants and edging that will stand beside the bollard. The base is bolted through three ø9 mm holes set 120° apart on a ø65 mm circle. The concrete anchor 1230ZX0009 and other accessories are bought separately. The bollard weighs 7.85 kg, 9.15 kg packed.The terminals take conductors up to 5 × 4 mm², also when looping through to further bollards, and the round cable can be 8–17 mm in diameter. The manufacturer allows 18 fittings per B10A circuit breaker and 28 per B16A. IP65 means dust-tight and protected against water jets, IK08 means impact resistance, and protection class I means a protective earth must be connected.Show more

from 829,39 €

1 offer

See all offers