Sigma Sopel 33214 – an adjustable silver wall spotVersion 33214 combines the narrow tube used throughout the Sopel collection with a silver metallic finish. A short support links the cylinder to a round wall plate, producing a coherent profile from both front and side. Long highlights visible on the surface emphasise its tubular geometry without turning the small fitting into a bulky decorative shade. It can provide a precise point of light beside a headboard or reading chair, near shelving, by a mirror away from water-exposed areas, or at a compact desk.Reposition the beam as the task changesThe silver head is not locked in one direction. It tilts through 90 degrees on the vertical axis and rotates up to 350 degrees. This makes it possible to aim at a book, displayed object or work surface, then turn the output towards a wall when softer reflected light is wanted. The tube is 15 cm long and 2.5 cm in diameter. Overall dimensions are 15 cm high, 10 cm wide and 16 cm deep from the mounting surface.Details for model 33214one replaceable G9 LED lamp;4 W LED maximum;lamp not included;silver lacquered-steel body and shade;90° tilt plus 350° rotation;bracket-mounted wall plate;IP20 specification;made in Poland;two-year warranty.Plan the switching and clearanceThere is no switch built into the fitting, which is intended for direct connection to the wall wiring. Its control should therefore be planned as part of the electrical installation, normally through a wall switch. The slim enclosure also means that the physical length of the selected G9 LED should be checked alongside cap type and wattage. Position the wall plate where the head can use its full range without meeting a shelf, corner or adjacent object. The circuit must be isolated before fitting, and the wiring should be completed by someone qualified to carry out the work safely.Zobraziť viacZobraziť menej