ZF - Lemförder

2x Tie Rod End Joints for PORSCHE 996 Carrera Turbo 986 Boxster

Name: 2x Tie Rod End Joints for PORSCHE 996 Carrera Turbo 986 Boxster
Brand: ZF - Lemförder

2x Tie Rod End Joints for PORSCHE 996 Carrera Turbo 986 Boxster The original from OEM ZF-Lemförder Description: The joints on tie rods are subject to wear, which usually starts with a torn boot. Once the grease has been washed out of the tie rod end or axial joint, the ball joint will fail within a few thousand kilometers. At the latest, the defective rubber boots or ball joints will be flagged during the vehicle inspection (TÜV). Depending on the Porsche model, the tie rods can consist of two or three main components. These include the axial joint, which is the inner ball joint in front of the steering gear, and the tie rod end at the outer end of the tie rod. Sometimes the axial joint and tie rod end are connected by a separate intermediate tube. Because replacing the tie rod always requires a new wheel alignment with toe adjustment, it is recommended to replace the entire tie rod depending on its condition. In our shop you will find a wide variety of tie rod ends, axial joints, and complete tie rods, including the correct steering boots. Our service team is happy to assist you with any questions. About the brand: The Lemförder brand has been part of the long-established ZF Friedrichshafen AG group of companies since 1984 and was originally founded in 1947. Lemförder is known as a long-standing direct supplier to the automotive industry and for developing products that are perfectly matched to the entire vehicle system. Lemförder products include, among others, stabilizer links, tie rods, wheel joints, and many other parts. Reference numbers: 996.347.322.03 993.347.322.03 996.347.322.04 Scope of delivery: As shown in the illustration Suitable for: 996 Carrera/turbo/GT2/GT3 986 BoxsterZobraziť viac

od 60,48 €

1 ponuka

↑ Najlepšia cena vzrástla o 6 % za 30 dní

Zobraziť ponuky