UnitedAds Shopping
AXAGON
Axagon ADSA-M2C SuperSpeed USB-C 10Gbps dual M.2 NVMe dock - Axagon
USB 10Gbps docking station for 2× NVMe SSD The fast AXAGON ADSA-M2C CLONE MASTER docking and cloning station with USB-C 10Gbps interface for working with up to two NVMe M.2 SSD drives. Cloning can be performed without connecting to a computer, from one source drive to another target drive. After connecting to a computer, you get up to two new storage drives at once. The station solves situations where you need to quickly format, erase, test, or prepare NVMe drive - for example during data migration, system installation, servicing, or backup. Stable operation is ensured by a chipset that maintains performance even under long-term load with minimal thermal throttling. A USB-C and USB-A 10Gbps cable is also included in the package. Cloning without a computer The station allows you to clone one NVMe M.2 SSD to another drive without using a computer or laptop. Simply insert the source drive into the NVMe Source slot and the target drive into the NVMe Target slot, start cloning with the button, and monitor the progress on the LED indication. Thanks to standalone cloning without operating system intervention, the process is safe and stable - the data is not affected by OS intervention. Button activation also minimizes the risk of an unwanted operation. The result is an exact copy of the drive including the operating system (Windows, macOS, Linux). The station clones the entire drive content block by block (LBA), so the cloning time depends on the capacity of the source drive, not on the amount of stored data. The target drives must have the same or higher capacity than the source drive. Reliable data transfer The USB 10Gbps (USB 3.2 Gen 2) interface offers a theoretical throughput of up to 10 Gb/s. The station performance is optimized for working with multiple SSD drives simultaneously, whether during cloning, data transfer, or everyday use. The achieved speed also depends on the type and generation of the M.2 SSD drives used. At the heart of the station is the modern ASMedia ASM2362 chipset, which helps maintain a stable transfer speed even under high load and during long-term operation. The result is smooth data transfer without significant fluctuations and efficient use of the performance of the connected SSD drives. Drives in the system, quick replacement and wide compatibility After connecting to a computer, both inserted drives appear as separate drives that you can work with independently and simultaneously, copy data, or use for storage management. The open design allows quick SSD replacement without screws, saving time when working with multiple drives. The two slots also make it possible to set up a software RAID, for example for higher data protection in Windows and macOS. To configure this protection, use the "Storage Spaces" tool in Windows or "RAID Assistant" in Disk Utility in macOS. The station is compatible with other USB standards and Thunderbolt 3, 4, 5 interfaces. It supports NVMe M.2 SSD drives with no capacity limitation and modern UASP, TRIM (NVMe DEALLOCATE), and S.M.A.R.T. technologies. Plug and Play and power-saving mode support are a matter of course. Passive cooling by aluminum body When working with NVMe SSD drives, the entire docking station is exposed to a higher thermal load. The aluminum body helps efficiently dissipate heat generated during station operation and contributes to better thermal stability of the device. The robust metal construction also supports reliable operation during long-term use and intensive data transfer. The rubberized bottom part reduces sliding of the station on the desk and ensures better stability during use. Everything you need for quick docking station setup is included in the package Cloning station, USB-C and USB-A 10Gbps cable for connecting to a computer, external power adapter and multilingual manual. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3 / 4 / 5. Device support: 2× NVMe M.2 SSD drives. Designed for M key or B+M key cards. 2× NGFF 75-pin M key slot for M.2 drives. No maximum drive capacity limitation. Drive content cloning function: Cloning takes place without connecting the station to a computer. NVMe Source slot - for connecting the source drive. NVMe Target slot - for connecting the target drive. The target drive must have the same or larger capacity than the source drive, otherwise cloning cannot be started. SSD cloning speed up to 1000 MB/s. The total drive cloning time depends on the speed of the drives used and the capacity of the source drive, not on the amount of data on the drive. Approximate cloning time for 1 TB of data: 1->1 drive approx. 18 min (tested with a PCIe 4.0 NVMe M.2 SSD with speed over 4000 MB/s and large cache memory). USB 10Gbps chipset for NVMe M.2 SSD:Visa mer
Erbjudande
Alla priser inkl. moms; frakt enligt butikens feed. Klicket leder direkt till produktsidan i butiken.
Prisutveckling (lägsta pris)
Prisbevakning
Meddela mig när den här varan sjunker i pris.
Produktdetaljer
- Märken
- AXAGON
- GTIN
- 08595247906496