LED Labs

PRO 3Y 24V 3150 LED COB 11W SPI RGB tape, 5m

Name: PRO 3Y 24V 3150 LED COB 11W SPI RGB tape, 5m
Brand: LED Labs

SPI digital COB LED strip allows independent control of each section determined by the cut points. Any color and effect can be programmed - with completely smooth transitions from one color to another, as well as static and dynamic effects! IP20 LED strip The IP20 parameter for LED tapes defines the most popular degree of waterproofing found on the market. IP20 LED strips are designed for use wherever there is no danger of excessive moisture or exposure to water. The LED strip specified with such a class of waterproofness allows exposure to dry dust and dust, thanks to the protective layer that the LEDs mounted on the strip are covered with. COB LED strip A characteristic feature of the strip, is the use of COB (Chip on Board) LEDs in it.. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. An additional advantage of using COB LED in LED strips is a wider angle of light dispersion and high light efficiency. COB LEDs emit a far superior beam of light compared to older LED technologies at lower power consumption. Requires installation of a power supply Each LED strip needs a properly selected power supply to work. When choosing a power supply, be guided by the voltage (for 24V tapes, choose a 24V power supply), the power of the tape, and the place where the power supply will ultimately be located. The power of the power supply depends on the power of the tape taking into account its length. The power of the LED strip given for one meter should be multiplied times its length. It is recommended to add 10% power supply backup. Depending on the mounting location, there are furniture, hermetic, slim power supplies. Requires driver installation SPI LED strips require a driver that supports digital signal WS2811Mostrar mais

desde 75,39 €

1 oferta

Ver ofertas