GL Sciences

GL Sciences GC Column InertCap ProGuard 1MS, 30 m x 0.25 mm ID, 0.25 μm film, with 2 m ProGuard

Name: GL Sciences GC Column InertCap ProGuard 1MS, 30 m x 0.25 mm ID, 0.25 μm film, with 2 m ProGuard
Brand: GL Sciences

InertCap ProGuard (Build-in Guard Column) Guard columns and retention gaps are used widely in gas chromatography. Both of them are short (1-10 m) piece of uncoated deactivated fused silica tubing which are placed in-line between the GC injection port and the analytical capillary column. Guard column is to protect the analytical column from contamination, not allowing nonvolatile materials to reach the analytical column. Retention gap is to help focus the compounds in large volume injected from the inlet to a small band at the head of the analytical column. InertCap ProGuard is a"guard column built-in"analytical capillary column without the connection for such purposes. For this reason, now there is no need to worry about leakage and compounds adsorption. InertCap 1MS is a non-polar column bonded 100 % Dimethylpolysiloxane. Samples elute in order of low boiling points. Designed for GC/MS, InertCap 1MS realizes the world highest inertness and ultra-low bleed.Mostrar mais

desde 761,79 €

1 oferta

Ver ofertas