Lumines

Aluminium end cap for the Lumines Conva LED profile, right-hand with cable hole, white

Name: Aluminium end cap for the Lumines Conva LED profile, right-hand with cable hole, white
Brand: Lumines

This is an aluminium end cap closing the right-hand end of the Lumines Conva LED profile, in the version with a cable hole, painted white. A system part — bought separately from the profile, like the rest of the mounting hardware. Right or left, with a hole or without One profile needs two caps: a left and a right. This is the right one. It also comes in two forms: solid — to close an end where nothing comes out — and with a hole, through which the supply cable is led. This is the second of those. When planning an order it is worth counting precisely: a single run fed from one side needs one holed cap and one solid cap, on the correct sides of the profile. Why aluminium End caps for LED profiles are often made of plastic; this one is aluminium, the same material as the profile itself. That has two practical consequences: the edge of the cap reads as a continuation of the profile, with no difference in sheen or texture, and the cap does not deform from the heat the profile gives off where it meets the end of the strip. Fixed with two screws The cap is screwed on with two screws rather than pushed in. That is the more durable arrangement on a wall fitting mounted in plain view: a push-fit cap can work loose over time, while a screwed one stays put even when the profile is cleaned or taken down to service the strip. Specification Type: end cap for an LED profile System: Lumines Conva Side: right Version: with cable hole Material: aluminium Colour: white Mounting: screwed on with 2 screws EAN: 5902973369717 Which profile it fits Conva is a surface-mounted wall LED profile intended for architectural lighting — for lighting vertical surfaces linearly, with controlled and even distribution along the plane of the wall. The maker describes it as a profile with a reduced UGR glare rating, directional flux and the ability to join runs. It mounts to the surface by way of a dedicated mounting profile. The cap fits this system only — LED profiles have no universal ends, and the Conva cross-section is an unusual one (triangular). About the manufacturer Lumines is a brand of profiles and hardware for LED strip, developed by LED Labs. Besides the profiles themselves the maker supplies the full system hardware: end caps, brackets, diffusers and mounting accessories, each selected per series.Mostrar mais

desde 22,77 €

1 oferta

Ver ofertas