NORLYS

Outdoor Wall Light Norlys Lillehammer DC2295AL Aluminium LED 3.6W 2700K 24V DC IP65

Name: Outdoor Wall Light Norlys Lillehammer DC2295AL Aluminium LED 3.6W 2700K 24V DC IP65
Brand: NORLYS

The Norlys Lillehammer DC2295AL is an outdoor wall light shaped as a closed block of 18.5 × 11 × 8 cm in aluminium — a matt grey that blends into render and concrete. The body is blind apart from a single window in its top face: that is where the light leaves, through optical glass.A very narrow beam, not general lightingThis is the thing to understand about this fitting. The LED module generates 512 lm, but only 15 lm leave through the optic — the rest is absorbed by the system that forms a beam of just 4°, aimed straight up (ULOR 100%). The result is a narrow, sharply drawn stripe on the façade immediately above the fitting, not a diffuse glow. Hence the luminaire efficacy of 4.2 lm/W: Lillehammer is a tool for emphasising masonry texture, edges and verticals, not for lighting an entrance or a driveway. If you need working light, this model will not replace a wide-distribution fitting.24 V supply — check this before buyingThe DC prefix in the index marks the low-voltage version: DC2295AL runs on 24 V DC in protection class III (SELV), not on 230 V. An external 24 V driver is required, sized for the combined load of every fitting on the circuit — a 230 V mains installation will not power it. Norlys also lists the mains version under index 2295AL; where a project has no 24 V line, that is the right choice.Durability and installationThe body is painted cast aluminium, the cable entry is sealed by an EPDM gland, and the window is closed with optical glass. IP65 covers dust and water jets, impact resistance reaches IK08, and the operating range is wide: −30 to +50 °C. The fitting is fixed through two ø5 mm holes at 45 × 130 mm centres. Terminals accept conductors up to 2 × 2.5 mm², and the supply can be looped onward with up to 2 × 1.5 mm².SpecificationManufacturer index: DC2295ALSupply: 24 V DC (SELV) — an external 24 V driver is requiredProtection class: IIIPower: 3.6 WLuminaire luminous flux: 15 lm (source flux 512 lm)Luminaire efficacy: 4.2 lm/W (source: 142.2 lm/W)Distribution: single 4° beam upward, ULOR 100%Colour temperature: 2700 K (warm white)Colour rendering: CRI 80, colour consistency SDCM3Dimensions: 18.5 × 11 × 8 cmNet weight: 1.60 kg, gross: 1.70 kgIngress protection: IP65Impact resistance: IK08Operating temperature range: −30 to +50 °CMaterial: painted cast aluminium, optical glass cover, EPDM glandMounting: 2 holes ø5 mm at 45 × 130 mm centresTerminals: max 2 × 2.5 mm², loop-through max 2 × 1.5 mm², cable ø7–10.5 mmCollection: LillehammerPokaż więcej

od 172,08 €

1 oferta

Zobacz oferty