Lumines

SARA 20-1410-11 fixed recessed light fitting, satin chrome, Ø81 mm, for MR16

Name: SARA 20-1410-11 fixed recessed light fitting, satin chrome, Ø81 mm, for MR16
Brand: Lumines

SARA 20-1410-11 is a round recessed fitting made from pressed sheet metal, designed to accept an MR16 light source. This satin-chrome version has a broad, flat trim ring with a visibly satin finish. It is not a complete electrically equipped light: both the light source and its socket must be selected separately.Check the cut-out, not just the trimThe outer diameter is 81 mm, the fitting height is 30 mm and the required mounting hole is 55 mm in diameter. When preparing a suspended ceiling, distinguish the visible ring size from the opening that needs to be cut. The trim remains at the ceiling surface while the rear part of the fitting sits inside the opening.The height of the fitting alone does not establish the space required for the entire assembly. Check the dimensions of the selected light source, socket and connections separately before making the ceiling openings.A fixed position with a separate light sourceSARA has no angle adjustment. Unlike a tilting fitting, it cannot be aimed sideways, so the position of each recessed point should be planned around the intended lighting area. MR16 compatibility does not replace the need to choose a suitable socket and supply. Brightness and light colour come from the selected source, not from the metal trim.A restrained ceiling detailThe simple circular outline and satin-chrome finish suit modern and minimalist interiors. Recessed points can form part of a living room, bedroom, kitchen, dining room, office or hallway lighting scheme. The result depends on spacing and source specifications; this fitting alone does not determine illumination levels or how far the light reaches.Pokaż więcej

od 1,28 €

1 oferta

Zobacz oferty