Rendl light studio

BURTON pendant for 3-circuit track E27 11W concrete/black 40 cm R13816 RENDL

Name: BURTON pendant for 3-circuit track E27 11W concrete/black 40 cm R13816 RENDL
Brand: Rendl light studio

BURTON is a pendant built from a concrete cylinder and a black metal cage of vertical bars, with the bulb visible inside. The cable ends in an adapter for a 3-circuit track — the fitting is not screwed to the ceiling, it clips into the track. A lamp with no fixed position That is the whole point of a track fitting: the adapter clips in anywhere along the track and slides when the room is rearranged. If the table moves half a metre, the lamp follows — no drilling, no new cable in the ceiling, no patched-up hole where the old point was. Several Burtons can hang in a row on one track, or share it with spotlights, because a 3-circuit track splits the fittings across three independently switched circuits. The adapter fits Eurostandard / EUTRAC tracks. Concrete and wire, bulb on show The shade is really a cage: vertical metal bars set below a concrete cylinder, with no glass and no diffuser. Light escapes sideways and downward, drawing the shadow of the bars across the walls, and the bulb itself stays visible — which is why this fitting calls for a decorative filament source rather than a plain frosted one. The concrete is not a veneer: it is solid, and it is why this small lamp weighs 1.8 kg. Check the track's load rating before planning a long row. E27 up to 11 W, bulb not included The holder is a standard E27 and the manufacturer caps the LED source at 11 W — not a lighting limitation, since an 11 W LED now gives what a 75–100 W incandescent once did. No bulb is included. Rendl states the fitting can be dimmed provided a dimmable bulb is used. The cable is 120 cm long; the shade itself is 40 cm tall and 12 cm across. IP20 keeps the lamp in dry interiors. Specification Manufacturer and model: RENDL BURTON for 3-circuit tracks, code R13816 Type: pendant for a 3-circuit track, 1 light point Adapter for 3-circuit tracks, Eurostandard / EUTRAC E27 holder, max 11 W (LED source) Light source: not included Dimmable: yes, with a dimmable bulb Shade diameter 12 cm, height 40 cm Cable length 120 cm Weight 1.8 kg Supply 230 V, no transformer Material: concrete and metal (black) IP20, indoor use EAN 8595685425900Pokaż więcej

od 133,75 €

1 oferta

Zobacz oferty