LED Labs

Tape PRO 3Y 24V 1200 LED 2835 SMD 15W WW RA90, 5 m

Name: Tape PRO 3Y 24V 1200 LED 2835 SMD 15W WW RA90, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. Warm white color Warm white color, thanks to its pleasant light similar to that of traditional incandescent lamps, is a solution suitable for installation in rooms intended for leisure and daily activities. Warm white light is not associated with the cold lighting characteristic of offices, making it possible to relax and unwind. IP20 LED strip IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. LED strips 24V - lower voltage drops The choice of LED strips with 24V drive is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. 1200 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the strip is placed and the lampshade. LED strips with a density of 240 LEDs per meter can be used as main lighting. The higher number of LEDs per meter allows for a line-of-light effect even with lower profiles (using an appropriate lampshade). Requires installation of a power supply The installation of a LED lighting system based on LED strips requires the installation of a power supply allowing to reduce the mains voltage to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the whole system, the smooth functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Installation of power supplies is done in invisible places, often difficult to access, so it is very important that when choosing an LED power supply, make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and the length of the installation. It is also worth paying attention to the shape and size of the power supply to ensure the most convenient installation. 300 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size