Lumines
RGB tape connector 10mm 1-sided snap-in. wired
RGB tape connector 10mm 1-sided snap-in. wired. Connector with one-sided snap allows you to mount tapes on one side without soldering. Simply snap the copper contacts of the LED strip into the connector. Thanks to the cables used, we will easily connect the RGB tape without termination together with the driver. The connector is designed for RGB LED tapes with a width of 10 mm. Cable length - approx.. 14 cm. Rated voltage up to 24 V Tape type RGB 10 mm Number of wires 4 Closure method Latch Connector body PVC Strand cross section 0.35 mm2 Connection type Single sided with wire and latchMeer tonen
Aanbieding
Alle prijzen incl. btw; verzendkosten volgens de feed van de shop. De klik leidt direct naar de productpagina van de shop.
Prijsverloop (laagste prijs)
2026-07-23 – 2026-08-04min € 0,27 · max € 0,27
Productdetails
- Merken
- Lumines
- GTIN
- 05907775755942
- Categorieën
- Huis en tuin > Verlichting > Railverlichting
