LUMINES DILEDA LED profile 2 m, black lacquered, surface-mounted and suspended, 27.4 × 26.1 mm, for two LED strips

Name: LUMINES DILEDA LED profile 2 m, black lacquered, surface-mounted and suspended, 27.4 × 26.1 mm, for two LED strips
Brand: Lumines

DILEDA is an aluminium LED profile from the LUMINES Lighting line, here in black lacquer and in a length that actually measures 2020 mm. It has a U-shaped section 27.4 mm wide and 26.1 mm high, and its channel is designed to hold two LED strips side by side. Dimensions and which strips fit The strip channel is 25.0 mm wide and 18.4 mm deep up to the cover line. The manufacturer intends it for two LED strips, so compare the combined width of your two strips with those 25 mm before ordering. The extra 20 mm over 2 m is an allowance for cutting the run to size. The datasheet gives the maximum LED power the profile can dissipate: 29.4 W at a profile temperature of 55 °C and 39.2 W at 65 °C. Set that figure against the combined power of both strips over the full length. Mounting The profile is mounted on a surface or on an edge, with screws or double-sided tape, and it can also be hung on suspension cables as a linear pendant. The driver sits outside the profile. The manufacturer shows lengths joined with straight and angle connectors, which allows continuous lines in different shapes. In the lacquered version the manufacturer also produces vertically bent profiles. What you need to buy separately The profile is sold on its own, without a cover, end caps or LED strips. It takes the DOUBLE cover (transparent, frosted, milky or black) and a raster cover that reduces glare. Without a cover it is rated IP20 and cannot be sealed, so it is for dry interiors. Each length is closed with two end caps: one with a cable hole at the feed end and one without at the far end.Meer tonen

€ 40,00

vanaf € 32,00

1 aanbieding

↓ Beste prijs de laatste 30 dagen met 20% gedaald

Bekijk aanbiedingen