Lumines

LED PRO D connector for 10 mm single-colour LED strips with DC socket 2.1/5.5

Name: LED PRO D connector for 10 mm single-colour LED strips with DC socket 2.1/5.5
Brand: Lumines

PRO D connector for 10 mm LED stripLED PRO D is a double-sided connector for 10 mm single-colour LED strip. PCB-piercing pins make contact with the strip, while the opposite end provides a 2.1/5.5 DC socket for the power supply. Manufacturer code 24-0000-60 and EAN 5904405901526 identify this version with a 15 cm cable.The connector is specified for 5, 12 or 24 V DC installations and a maximum current of 2 A. Its contact pins allow a solder-free connection, and the opening tool helps when positioning the strip. The transparent housing is polycarbonate and the conductive parts are copper.Compatibility at a glancefor 10 mm MONO LED strip,double-sided 2PIN connector with 2.1/5.5 DC socket,15 cm cable, 2 × 0.3 mm²,connector dimensions: 22 × 14 × 7 mm.Select it according to both strip width and strip type; it is not intended for RGB or RGBW tape. It can be used with IP20 and IP65 strips, but the connection itself must be sealed if the IP65 rating is to be retained. This System D accessory provides a detachable connection between a single-colour LED strip and its power supply.Show more

from 1,00 €

1 offer

See all offers