-20 %

Lumines
Lumines current-carrying suspension kit 1500 mm, 0.75 mm², silver – for LED profiles
The Lumines current-carrying suspension kit hangs a linear luminaire built from an LED profile on a steel wire that also carries its power supply. The wire is 1500 mm long and 1.55 mm thick, with a 0.75 mm² copper conductor running inside a transparent FEP sheath. The fittings at both ends have a silver metallic finish. What is in the kit and how many kits you need The kit contains one wire, a ceiling connector with an M10x1 thread and a hole, and two insulated type 15 wire grippers – one with an M10x1 thread and one with an M4 female thread on the luminaire side. The wire length sets the longest possible drop: about 1.5 m below the ceiling. The same range also comes with 1250 mm and 2000 mm wires. In the manufacturer's installation diagram the luminaire hangs from two suspensions, and each wire carries one pole of the supply – one positive, the other negative. One luminaire therefore needs two kits. The power supply, the profile and the LED strip are not included. Voltage, current and load The suspension works at 5 to 50 V, in the low-voltage circuit after the LED driver – it is not connected directly to 230 V mains. The manufacturer gives a safe current of 9 A, which is the figure to compare with the current drawn by the strip in the luminaire. The 0.5 mm² version carries 6 A, so the 0.75 mm² conductor is the choice for more powerful and longer strip runs, where the thicker core limits the voltage drop along the wire. Each wire holds up to 2.5 kg (1.8 kg for the 0.5 mm² version). Compare this with the weight of the complete luminaire: profile with cover, strip and end caps. Which profiles it fits The manufacturer lists the kit for LUMINES profiles of the A, D, X, Y, I6, I10, MICO, SILEDA, DILEDA, DOPIO, ILEDO, TALIA and LARGO systems, and for the Largo M1 and Talia M1 mounting profiles. Because the current runs through the wires, no separate cable has to go from the ceiling to the luminaire – only two thin wires are visible above it.Mostra di più
Offerta
Tutti i prezzi IVA inclusa; spese di spedizione secondo il feed del negozio. Il clic porta direttamente alla pagina prodotto del negozio.
Andamento del prezzo (prezzo minimo)
Avviso prezzo
Avvisami quando il prezzo di questo articolo scende.
Dettagli del prodotto
- Marche
- Lumines
- GTIN
- 05904405935088
- Categorie
- Casa e giardino > Illuminazione
Prodotti simili
STEINEL IS 130-2 Passive infrared (PIR) sensor Wired Wall White -Confronto prezzi tra 2 negozida 41,06 €
STEINEL IS 130-2 Passive infrared (PIR) sensor Wired Wall Black -Confronto prezzi tra 2 negozida 41,06 €
Nordlux 49091003 smart home multi-sensor Wireless Bluetooth - NordluxConfronto prezzi tra 2 negozida 30,60 €
Nordlux Fox Transformer 12 V, 3–55 W LED / 20–55 W Halogen, White 12351101Confronto prezzi tra 2 negozida 61,20 €
STEINEL ST 608810 motion detector Infrared sensor Wired Wall White -Confronto prezzi tra 2 negozida 63,40 €
STEINEL IS 180-2 Infrared sensor Wired Wall Black - STEINEL IS 180-2,Confronto prezzi tra 2 negozida 71,05 €