
Lucide
Lucide TRACK 09950/07/31 T-connector for track, 1-circuit, white RAL 9003, 17.9 x 10.7 cm
This is a T-shaped connector for the single-circuit Lucide TRACK system. It lets you join three lengths of track at one point: two in a straight line and one running off at right angles. What it is for A plain track has two ends and one direction. The T-connector changes that fundamentally: wherever you insert it, the run branches. That lets a single circuit serve a T-shaped layout — a track down the length of a living room with a spur over the dining table, say, or a main run in a hallway with a branch turning into the kitchen. Because the supply is shared, every fitting across the whole layout works from one switch. That is an advantage when the track is meant to be one circuit, and a limitation if you want to control the branch separately. Important: this is an extension part, not a starter set The manufacturer states it outright — to use this item you must already own a TRACK starter set. The connector on its own includes no track, no power feed and no end caps. It belongs to the kind of system where you buy exactly as many parts as the planned route needs. It is compatible with the entire Lucide TRACK range — tracks, fittings, straight and corner connectors, end caps and feeds from the same series. Installation materials are included. How much the system will take It is worth knowing the limits a TRACK installation is designed within. The manufacturer states that a single layout can be extended to 400 metres of track, at 5 fittings per metre and a combined load of up to 3500 watts. No domestic installation comes near any of those — they are figures for shop and gallery use — but they show that a home layout with a dozen or two fittings sits inside them with enormous margin. Dimensions and build Dimensions 17.9 × 10.7 × 1.8 cm — the part is flat and projects from the ceiling by the same amount as the track itself Weight 0.14 kg Material PVC, matt finish, electro-galvanised coating on the contact parts Colour white in RAL 9003 — the same white as the rest of the series, so the connector disappears into the run A black version (RAL 9004) is also made, if the layout is being run in black. Safety and installation The system runs at 230 V and is protection class I, which means the installation requires an earth conductor. Protection IP20 — dry interiors only. Connecting track is work on a fixed installation; if you are not qualified, have an electrician fit it. The connector itself contains no electronics and does not affect dimming — if the track is fed through a dimmer, it works the same across the whole layout, including beyond the branch. Catalogue data Article 09950/07/31, EAN 5411212093776, TRACK series, manufacturer Lucide (Belgium). Warranty 2 years.Mostra di più
Offerta
Lunares.eu
Disponibile · Spedizione: 12,50 €*Spedizione da 🇪🇸 ES → 🇮🇹
20,50 €
Totale: 33,00 €
Tutti i prezzi IVA inclusa; spese di spedizione secondo il feed del negozio. Il clic porta direttamente alla pagina prodotto del negozio.
Andamento del prezzo (prezzo minimo)
Avviso prezzo
Avvisami quando il prezzo di questo articolo scende.
Dettagli del prodotto
- Marche
- Lucide
- GTIN
- 05411212093776
- Categorie
- Casa e giardino > Illuminazione > Illuminazione a binario > Accessori per illuminazione a binario
Prodotti simili
Zaleplepka 9004 / W STUCCHI white, black, gray1 offertada 3,44 €
Power Supply 48V - 150W Plug-in to LUNA-MAG Busbars Black - LUNARES1 offertada 66,75 €
Pendant Lamp Adapter SLV 1 SYSTEM Black 1431201 offertada 15,28 €
1-Phase Track Adapter SLV 1 SYSTEM black 1431701 offertada 15,28 €
Eutrac Lighting Bus T Switch Right Silver Grey 230 V1 offertada 170,00 €
Zambelis L-shaped flex connector with cable for 48V magnetic track 20105 black1 offertada 27,27 €