LED Labs

PROFI 48 V tape 1000 LED 2835 SMD 12 W 2300 K 25 m

Name: PROFI 48 V tape 1000 LED 2835 SMD 12 W 2300 K 25 m
Brand: LED Labs

LED 2 LED CUT, powered by 48 V DC, is a revolutionary lighting solution that allows one-sided powering of tape sections of up to 15 meters in length, with the ability to perfectly match the desired length thanks to an extremely short cutting section every 10 mm. In addition, its exceptional luminous efficiency of up to 143 lm/W makes it an ideal product not only as decorative lighting, but also as a main light source. A high color rendering index (RA>90) ensures natural color reproduction, and a lifespan of 60000 hours guarantees long-term use. LED PROFI tape series is a line of products designed for professionals. PROFI LED strips are branded by LED Labs Lighting and covered by an extended warranty period. By using a 3oz copper PCB backing, they were able to significantly increase their lifespan. PROFI series also means noticeably lower voltage drops compared to standard LED strips. PROFI series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Ultra warm color - 2300 K Ultra warm white color is the closest to the light of traditional incandescent bulbs. Light sources of this color will be ideal in rooms used for rest and recreation. Warm light is used in homes and apartments, making rooms more cozy. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from the effects of fine dirt. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. LED strips 48 V - lower voltage drops Choosing 48-volt LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to their lower current consumption, the 48-volt LED strips also allow the use of smaller cables, which can be helpful when designing installations. This allows the wires to be more easily hidden. See the colors in their natural shades CRI tells you how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Requires the installation of a power supply LED tape requires installation of a power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply.