NORLYS

Norlys Nidaros 2122AL outdoor wall light, LED 8.3 W 754 lm 3000 K, aluminium, IP65, dimmable

Name: Norlys Nidaros 2122AL outdoor wall light, LED 8.3 W 754 lm 3000 K, aluminium, IP65, dimmable
Brand: NORLYS

Nidaros 2122AL is an outdoor wall light in cast aluminium, 23 × 12 × 12 cm, with an integrated LED module and a glass diffuser. It emits one-sided, downward, in a 24° beam — a fitting for marking and washing the wall beneath it, not for lighting a whole façade. Why the power and flux figures do not line up The maker gives three numbers that are best read together. The LED module itself draws 6.7 W and produces 1051 lm (156.9 lm/W). The complete luminaire draws 8.3 W from the mains — the driver takes the difference — and puts out 754 lm, because the diffuser and optics hold some light back. Hence a luminaire efficacy of 90.8 lm/W. When comparing this lamp with another, compare 754 lm and 8.3 W, not 1051 lm and 6.7 W — the latter are module figures, not product figures. Phase dimming and light quality The fitting is dimmable with a trailing-edge phase dimmer — the type intended for LED loads; a leading-edge dimmer made for incandescent lamps can cause flicker or buzzing. Colour is 3000 K, CRI 80, and colour consistency SDCM3, tighter than the usual SDCM6 — install several along a façade and differences of shade between units will be practically invisible. A power factor of 0.90 and THD of 15% matter on larger installations where circuit loading counts. BUG classification B1-U1-G0 This is shorthand for light emitted where it is not wanted: B (backlight) 1, U (uplight) 1, G (glare) 0. A zero G means no flux in the glare zones, and U1 means minimal upward emission, that is, little contribution to sky glow. For a fitting mounted by a path or next to a neighbour's terrace that is concrete information, not a marketing claim. Specification Manufacturer code: 2122AL (Nidaros series); EAN 7042892122098 Type: outdoor wall light, 1 light point Dimensions: 23 × 12 × 12 cm (l × w × h) Material: painted cast aluminium; diffuser: clear glass Colour: aluminium Luminaire power: 8.3 W (LED module 6.7 W) Luminaire flux: 754 lm (module flux 1051 lm) Efficacy: 90.8 lm/W (luminaire), 156.9 lm/W (module) Colour temperature: 3000 K; CRI 80; colour consistency SDCM3 Energy efficiency class: D Life: 50,000 h (about 45 years at 3 hours a day) Dimming: yes — trailing-edge phase dimmer Supply: 220–240 V; PF 0.90; THD 15% Protection class: I (earth required) Ingress protection: IP65 Ambient temperature: +25 °C Photobiological risk: RG0 or RG1 Distribution: one-sided light, 24° downward; BUG classification B1-U1-G0 Mounting: 2 holes; terminals max 3 × 2.5 mm², looping possible with max 1.5 mm²; round cable ø7–10.5 mm Net weight: 1.50 kg; gross: 1.70 kg Warranty: 5 years; anti-corrosion warranty: 25 years Origin: European Union IP65 and a 25-year anti-corrosion warranty IP65 is full dust tightness plus resistance to water jets from a nozzle from any direction — the level appropriate for a façade exposed to rain and low-pressure washing. Separately the maker declares a 25-year anti-corrosion warranty on the painted aluminium casting; that is a commitment about the coating, not the electronics, and it matters on the coast and beside salted roads. Looping — why it matters on a façade The terminals take up to 3 × 2.5 mm², and the maker explicitly allows looping onward to the next fitting with up to 1.5 mm². On a run of several wall lights that lets one supply line pass through them all instead of pulling a separate circuit to each — fewer cables in the insulation and fewer junction boxes on the wall. About the manufacturer Norlys is a Norwegian maker of outdoor lighting from Oslo, specialising in façade fittings, bollards and lanterns built for the Scandinavian climate. Production takes place in the European Union.Mostra di più

da 243,76 €

1 offerta

Vedi le offerte