Lumines

LED Profile LUMINES APA12 for Plasterboard Silver Anodised 2.02 m 10-0404-20

Name: LED Profile LUMINES APA12 for Plasterboard Silver Anodised 2.02 m 10-0404-20
Brand: Lumines

LUMINES APA12 is an aluminium profile for building into 12 mm plasterboard. The flange, 39.4 mm across in total, is plastered in along with the board, so once the surface is finished only the 10.2 mm lit slot remains visible. This item is a 2.02 m length in the silver anodised finish.What it is forThe manufacturer describes APA as a wall and ceiling profile for lighting ceiling coves and decorative arrangements. The geometry is the point: the profile mounts on the surface or at an edge, where two planes meet, and it is what draws the characteristic line of light along the ceiling edge. It is not a profile for task lighting over a worktop — the output leaves perpendicular to the profile, and the manufacturer lists decorative lighting only.Capacity and permitted loadThe channel measures 9.0 mm wide and 13.6 mm deep, which suits a standard LED strip with room to spare for the wiring. The aluminium acts as the heatsink and sets the power ceiling: 32.2 W at a profile temperature of 55 °C and 43.4 W at 65 °C. The higher figure means a hotter profile and faster ageing of the diodes, so in a closed build-up it is worth designing closer to the lower limit. The driver is mounted outside the profile.LimitationsThe manufacturer notes that this profile cannot be joined into longer runs — each length works on its own, so the span has to be planned in advance. The profile is neither walk-over rated nor sealable; IP20 places it in dry interiors. Available lengths are 1.0 m, 2.02 m and 3.0 m, and up to 6 m to order, in silver anodised, white or black lacquered.SpecificationManufacturer: LUMINES LightingSystem: APA12Catalogue number: 10-0404-20EAN: 5902973361711Material: aluminiumFinish: silver anodisedLength: 2.02 mOverall width including flange: 39.4 mmBody width: 20.5 mmOverall height: 20.2 mmInternal channel: 9.0 × 13.6 mmLight aperture: 10.2 mmFor 12 mm plasterboardMounting technique: to be plastered inMounting method: surface, edgeBeam direction: perpendicular to the profileFor creating: decorative lighting, ceiling covesMaximum dissipated power: 32.2 W at 55 °C profile temperatureMaximum dissipated power: 43.4 W at 65 °C profile temperatureDriver location: outside the profileIngress protection: IP20 (not sealable)Connectable: noWalk-over rated: noOther lengths: 1.0 m, 3.0 m, up to 6 m to orderOther colours: white lacquered, black lacqueredMostra di più

da 35,22 €

1 offerta

Vedi le offerte