LED Labs

LED strip PRO 3Y 5050 SMD RGB IP65HS, 7.2W, 150 LEDs, 5 m

Name: LED strip PRO 3Y 5050 SMD RGB IP65HS, 7.2W, 150 LEDs, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. RGB LED Tape RGB LED strips allow you to obtain lighting from the RGB color palette. This means that by choosing this type of tape, we can get any color of light. RGB tape is often used for decorative lighting, as gaming lighting or media wall backlighting. RGB LED strips require the installation of an LED driver. IP65HS LED strip IP65 Heat Shrink is the solution of using a heat shrink band around the entire LED strip. Unlike the silicone coating with which classic IP65 LED strips are protected, this allows the LED strips to maintain high light performance with very high resistance to moisture and splashes. Tape 150 LED 5050 SMD The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes. The density of the LED tape determines how many diodes are on a meter of tape. The more LEDs per meter of LED tape, the more uniform and powerful the light is. LED strips with a density of 30 LEDs per meter have low power consumption. Fewer LEDs translate into less light. Requires installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver In order to install RGB LED strip, you need a driver. With it, it is possible to change the color from the RGB color palette. When choosing a driver, voltage is an important parameter (the driver is mounted between the power supply and the LED strip). Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).Mostra di più

da 20,96 €

1 offerta

Vedi le offerte