Lumines

LED PRO B connector for RGBW 10mm 1-sided LED strips with wire

Name: LED PRO B connector for RGBW 10mm 1-sided LED strips with wire
Brand: Lumines

LED PRO B connector 24-0000-47 makes a one-sided connection between a 10 mm RGBW LED strip and a lead wire. It is a practical installation component when a solder-free connection and tidy cable routing are needed.For RGBW strip connectionsFive PCB-piercing pins contact the strip pads when the connector is pressed closed. This one-sided PRO B version has a 15 cm wire, specified as 5 × 0.3 mm², and is made for 10 mm RGBW strips. Its transparent housing makes it easier to check the strip position while fitting it.Technical detailsPRO B series; 5-pin connector for 10 mm RGBW strips,5 / 12 / 24 V DC operation, maximum current 2 A,connector dimensions: 22 × 15 × 7 mm,polycarbonate and copper construction.Practical installationThe click mechanism creates a durable connection without a soldering iron, while the opener helps when access to the connector is needed again. It can be used with IP20 strips and with IP65 strips only when the completed connection is sealed correctly. Before installation, confirm the strip width, RGBW pad layout and power parameters of the full LED system.Mostra di più

da 0,84 €

1 offerta

Vedi le offerte