NORLYS

NORLYS Asker MD1531GR graphite outdoor LED wall light with sensor 9.4 W 2700 K IP65

Name: NORLYS Asker MD1531GR graphite outdoor LED wall light with sensor 9.4 W 2700 K IP65
Brand: NORLYS

NORLYS Asker Small Down MD1531GR is a graphite outdoor LED wall light with an integrated microwave motion sensor. The fitting draws 9.4 W, delivers 331 lm of warm 2700 K light and distributes it diffusely in a downward hemisphere. Its RAL 7016 aluminium body carries IP65 ingress protection and an IK08 impact rating.A diffused downward light patternThe integrated LED module produces 773 lm, while the complete fitting emits 331 lm at an efficacy of 35.2 lm/W. Its diffused downward distribution forms a clear pool on the façade and limits upward emission: ULOR is 0% and the BUG classification is B0-U0-G0. A 2700 K colour temperature creates a warm effect, with CRI 80 and SDCM3 describing colour quality and consistency. The LED source is replaceable by professional service personnel only.Motion sensing with dusk controlThe built-in Merrytek MC119S microwave sensor provides settings for detection area, hold time and ambient-light threshold. Factory values are 100% detection area, a five-second hold time and the dusk threshold disabled. At a mounting height of 2.5 m, the manual illustrates an indicative reach of about 2 m to either side and 3 m downwards. The settings should be adjusted after installation to suit the location and reduce unwanted switching.Materials prepared for outdoor exposureThe powder-coated cast-aluminium body is combined with a structured transparent polycarbonate lens stabilised against UV, a silicone gasket and an EPDM cable gland. IP65 protects against dust and water jets, while IK08 defines impact resistance. The permitted operating range is -25 to +60°C. The graphite finish corresponds to RAL 7016. Overall dimensions are 22.5 × 11.5 × 8.5 cm; net weight is 1.44 kg and gross weight 1.58 kg.Mounting and electrical connectionThe fitting uses two Ø4.5 mm mounting holes spaced 180 × 60 mm. Terminals accept conductors up to 3 × 2.5 mm², with loop-through connection up to 3 × 1.5 mm²; a round-sheathed cable of Ø7–10.5 mm is required. Asker operates at 220–240 V and is a Class I fitting, so protective earthing is essential. Installation and replacement of the LED source or control gear should be carried out by qualified personnel in accordance with the supplied instructions.Mostra di più

da 188,20 €

1 offerta

Vedi le offerte