MEAN WELL PLM-25-350 power supply unit 25.2 W Black, White - MEAN
Mean Well

MEAN WELL PLM-25-350 power supply unit 25.2 W Black, White - MEAN

20,41 €
www.sotel.de/en Go to shop

Description

- 230VAC only or Full range (up to 295VAC)
- models available
- Built-in active PFC function
- Constant current design
- Protections:Short circuit
- Cooling by free air convection
- Fully isolated plastic case
- Class II power unit, no FG
- Class 2 power unit(for PLM-25-500/700/1050)
- No load power consumption <0.5W
- High reliability,low cost
- 2 years warranty

PLM-25 is a 25W economical AC/DC LED power supply series. Incorporating a built-in active PFC
design, PLM-25 provides a high Power Factor value greater than 0.9. In addition, with the low no load
power consumption below 0.5W, and the setup time less than 500ms, PLM-25 is complied with the ErP
regulation required by European Union for lighting fixtures.
PLM-25 is a class II (without FG pin) power unit housed with the UL 94V-0 rated flame retardant
plastic case. The I /O terminals are designed with screw-less clamp style terminal block that greatly
simplifies the wiring installation. Two types of models with different input voltage range are offered:
PLM-25 series, which operates from 110~295VAC, and PLM-25E series, which operates from
180~295VAC.These two series are both constant current output design, supplying models with the
current of 350mA, 500mA, 700mA and 1050mA, respectively.

Weight & dimensions

  • Width: 38 mm
  • Depth: 145 mm
  • Height: 22 mm
  • Weight: 126 g

Power

  • Total power: 25.2 W
  • AC input voltage: 110 - 295 V
  • AC input frequency: 47 - 63 Hz
  • Input current: 0.15 A
  • Power Factor Correction (PFC) type: Active
  • Efficiency: 87%
  • Power protection features: Short circuit

Operational conditions

  • Operating temperature (T-T): -30 - 45C
  • Storage temperature (T-T): -40 - 80C
  • Operating relative humidity (H-H): 20 - 90%
  • Storage relative humidity (H-H): 10 - 95%

Design

  • Product colour: Black, White

Performance

  • Mean time between failures (MTBF): 808162 h
  • Safety: UL8750, CSA C22.2 No. 250.13-12(for Blank type only); ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1 (for E type only) , IP30 approved