LED Labs

Tape PRO 3Y 24V 2640 LED COB 10W NW RA90 -20m HS, 5 m

Name: Tape PRO 3Y 24V 2640 LED COB 10W NW RA90 -20m HS, 5 m
Brand: LED Labs

LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each 3Y series LED strip comes with Blue Tape mounting tape. A uniform line of light in your home! Thanks to the increased number of LEDs, it is possible to achieve a uniform line of light even when using a low D, Z, or SOLIS type aluminum profile. COB LEDs, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption. Neutral white color Neutral white LED strip allows you to get more light. This is the color that is most similar to daylight. Even a long stay in a room illuminated by a neutral-colored light source is not tiring to the eyes. This makes the tape universally applicable, it will work in virtually any room. LED tape IP65HS IP65 Heat Shrink is the solution of using a heat shrink band around the entire LED strip. Unlike the silicone coating with which classic IP65 LED strips are protected, this allows the LED strips to maintain high light performance with very high resistance to moisture and splashes. 24V voltage - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.Show more

from €248.87

1 offer

See all offers