Rendl light studio

EUTRAC Continuous Power Supply for 3-Circuit Track Silver Grey 230 V RENDL

Name: EUTRAC Continuous Power Supply for 3-Circuit Track Silver Grey 230 V RENDL
Brand: Rendl light studio

The EUTRAC continuous power supply is a feed-in component for the EUTRAC 3-circuit track, in silver grey, for 230 V. It is neither a luminaire nor a length of track but the part through which current enters the track.How it differs from an end feedThe maker describes it as mountable at any point along the track, without dividing the track. An end feed needs a free end of the run; this part brings power into the middle of a finished, continuous length of track — where the supply comes out halfway along a room.Load and supplyMaximum load is 16 A. At 230 V that works out to roughly 3.6 kW of connected load — the sum of the fittings running on the fed section, and the figure to compare a planned set of heads against. The part works directly on 230 V mains and contains no driver, because track fittings draw their current straight from the track.Size and compatibilityThe connector measures 13 cm long with a 3.6 × 3.6 cm cross-section and weighs 83 g. It belongs to the EUTRAC 3-circuit system in the Eurostandard profile; 1-circuit tracks have a different profile and it does not fit them.The maker lists the same part in three finishes — white R11346, black R11347 and silver grey R11348 — so the colour is chosen to match the track. The track itself, its end caps and the luminaires are separate articles.Show more

from €80.00

1 offer

See all offers