Lumines

End Cap for Lumines CLARO LED Profile Without Hole Aluminium Black

Name: End Cap for Lumines CLARO LED Profile Without Hole Aluminium Black
Brand: Lumines

An aluminium end cap that closes the end of the Lumines CLARO LED profile, lacquered in a black matched to the profile's black finish. It is a finishing part: without it, an open profile end leaves the LED strip and wiring on view.The no-hole version This cap is solid — there is no cable entry. It goes on the profile end where nothing comes out: against a wall, at the end of a run, or wherever the driver is hidden inside the profile. If a cable has to leave at that point, you need the version with a hole (ALU 12-0000-54) or the ABS variant with a routed hole — a typical installation puts the holed cap on one end and the solid one on the other.Build and installation The body is aluminium, finished in the same black lacquer as the profile, so the end does not stand out from the rest of the fitting. The cap fixes with four screws — a screwed fixing rather than a push fit means it will not work loose when the profile is taken down or the strip is changed. The inner edge is shaped to enter the profile section and sit flush with its sides.Which system it belongs to The cap is part of the CLARO profile's accessory range — a surface-mounted and suspended profile for homes and offices that takes two LED strips and can hide the driver inside. Lumines offers the same cap in white (ALU 12-1141-11) and silver (ALU 12-1145-11), so the end can be matched to any of the three profile finishes.Specification Manufacturer code: ALU 12-0000-53 EAN: 5907775757984 For: Lumines CLARO LED profile Version: without hole Material: aluminium Finish: black lacquered Mounting: screwed on with 4 screws Related versions: with cable hole ALU 12-0000-54, with routed hole ABS 12-1302-01 Other aluminium colours: white ALU 12-1141-11, silver ALU 12-1145-11Több megjelenítése

8410 Ft-tól

1 ajánlat

Ajánlatok megtekintése