KLUŚ

Profile for LED strips PIKO-O Silver anodized e6-k1 3m

Name: Profile for LED strips PIKO-O Silver anodized e6-k1 3m
Brand: KLUŚ

The PIKO-O LED strip profile has the ability to rotate the luminaire 360 degrees using PIKO-O conductive end caps Works with 5 mm wide LED strips. The product is available in the following colors: silver and black anode. Its characteristic features are the minimum cross-section diameter and smooth profile surfaces. The PIKO-O LED profile has a round luminaire cross-section.. The main purpose of the PIKO-O LED profile is decorative and functional lighting. Installation is suspended, using dedicated accessories. The profile cover is cut to its length. This product is characterized by simple "click" assembly and disassembly. It is possible to smoothly adjust the lighting angle of the LED strip profiles. The selected LED profile is characterized by a small bending radius. The manufacturer offers other colors of finish on request. Maximum deflection of the profile for PIKO-O LED strips on the section: 3 m is 45 mm 2 m is 25 mm 1.75 m equals 15 mm 1.50 m is 10 mm 1.20 m equals 5 mm 1 m is 2 mm PIKO-O LED profile conductive end cap ensures conduction of one current pole. The maximum forward current for the PIKO-O conductive end cap is 2 A. Profile bending Minimum inside radius: 150 mm Minimum external radius: 1000 mm minimum radius - bending radius, the exceeding of which causes damage (deformation, kink) of the profile or the profile does not work with accessories, covers, plugs, etc. inner radius - applies to a profile bent so that the cover is inside the arch outer radius - applies to the profile bent so that the cover is located on the outside of the arch irregular curves are possible after consultation and individual valuation when bending anodized profiles, one should take into account the cracking of the anodic coating (which, depending on the radius, may be more or less visible)Εμφάνιση περισσότερων

από 12,18 €

1 προσφορά

Δείτε τις προσφορές