
Maytoni
Maytoni 48V magnetic track power supply 150W grey TRA004DR-150S
TRA004DR-150S is a 150 W driver for Maytoni's 48 V magnetic track system. A metal housing 15.9 × 9.7 × 3 cm, AC 100-260 V in, 48 V out. Without it the track does nothing A magnetic track does not run on mains voltage: magnetic fittings are not connected to 230 V but to a safe **48 V**, and converting one to the other is exactly what this driver does. It is a separate catalogue item — buying a track and fittings means buying a driver of adequate power as well. The arrangement has a practical consequence too: the voltage on the track is low, so the rails themselves pose no touch hazard and fittings can be repositioned without switching the circuit off. 150 W is the power budget for the whole track Choosing a model comes down to arithmetic: add up the wattage of every fitting that will hang on one run and pick a driver with headroom. This one gives **150 W**, which with typical 6–18 W magnetic spots will serve a dozen or more points. Maytoni offers the same housing in four ratings — **TRA004DR-100S** (100 W), **150S**, **200S** and **320S** — so extending an installation usually means changing the driver, not the whole system. It is not worth sizing it exactly to the calculated sum: a driver running near its maximum gets hotter and lives less long. Where to hide it The housing measures 15.9 × 9.7 cm at just **3 cm high** — designed to fit in the void above a suspended ceiling, in a service box or inside cabinetry. It weighs 0.4 kg. **IP20 means it must go somewhere dry and enclosed**, not outdoors and not into a bathroom protection zone. The metal case works as a heatsink, so it should not be wrapped in mineral wool or shut into a sealed box without ventilation. Electrical data and limits The input takes a wide **AC 100-260 V** range, which makes the driver tolerant of mains fluctuation. It works in protection class I and requires an earth conductor. The driver itself is **not dimmable**: brightness control in a magnetic system happens at the fittings or through a dedicated controller, not by putting this module on a phase-cut dimmer. Maytoni covers the product with a **five-year warranty**. It contains no light source of any kind — it is purely a supply component. Specification Manufacturer: Maytoni Collection: Power supplies 48V Series: Power Supply Magnetic Article: TRA004DR-150S Type: driver for magnetic track System: 48 V magnetic Power: 150 W Input voltage: AC 100-260 V Output voltage: 48 V Length: 15.9 cm Width: 9.7 cm Height: 3 cm Material: metal Colour: grey Ingress protection: IP20 Protection class: I Dimming: no Net weight: 0.4 kg Gross weight: 0.42 kg Warranty: 5 years EAN: 4251110047966Εμφάνιση περισσότερων
Προσφορά
Όλες οι τιμές με ΦΠΑ· έξοδα αποστολής σύμφωνα με το feed του καταστήματος. Το κλικ οδηγεί απευθείας στη σελίδα του προϊόντος στο κατάστημα.
Ιστορικό τιμής (χαμηλότερη τιμή)
Ειδοποίηση τιμής
Ενημέρωσέ με όταν πέσει η τιμή αυτού του προϊόντος.
Λεπτομέρειες προϊόντος
- Μάρκες
- Maytoni
- GTIN
- 04251110047966
- Κατηγορίες
- Σπίτι και κήπος > Είδη φωτισμού > Φωτισμός με ανίχνευση κίνησης > Αξεσουάρ ράγας φωτισμού
Παρόμοια προϊόντα
Zaleplepka 9004 / W STUCCHI white, black, gray1 προσφοράαπό 3,44 €
Power Supply 48V - 150W Plug-in to LUNA-MAG Busbars Black - LUNARES1 προσφοράαπό 66,75 €
Pendant Lamp Adapter SLV 1 SYSTEM Black 1431201 προσφοράαπό 15,28 €
1-Phase Track Adapter SLV 1 SYSTEM black 1431701 προσφοράαπό 15,28 €
Eutrac Lighting Bus T Switch Right Silver Grey 230 V1 προσφοράαπό 170,00 €
Zambelis L-shaped flex connector with cable for 48V magnetic track 20105 black1 προσφοράαπό 27,27 €