sE Electronics

sE Electronics V7 Silver Bundle with K&M Microphone Boom Stand and 5m XLR Cable

Name: sE Electronics V7 Silver Bundle with K&M Microphone Boom Stand and 5m XLR Cable
Brand: sE Electronics

In this bundle 1 × SE Electronics V7 Dynamic Vocal Microphone Silver 1 × K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm) 1 × W Audio 5m XLR Male - XLR Female Microphone Cable SE Electronics V7 Dynamic Vocal Microphone Silver The sE Electronics V7 is a supercardioid dynamic handheld vocal microphone built around the custom DMC7 capsule with an aluminium voice coil. It delivers extended frequency response and high gain before feedback for live vocal use, paging and broadcast.Key FeaturesCustom DMC7 dynamic capsuleAluminium voice coil for extended top-endTight supercardioid pattern for feedback rejectionInternal shockmount for low handling noiseAll-metal zinc alloy chassisDent-proof spring steel mesh grilleInternal pop screenStandard XLR outputSilver finishIncludes mic clip, thread adapter and zip pouchSpecificationsTypeDynamicPolar patternSupercardioidFrequency response40 Hz to 19 kHzSensitivity2.0 mV/Pa (-54 dBV)Output impedance300 ohmsConnector3-pin XLRDiameter54 mmLength184 mmWeight305 gFinishSilver K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm) The K&M 27910 is a lightweight, no-nonsense boom stand for vocals, speech and instrument miking. A folding tripod base with metal legs packs down small for transport, and the two-piece column adjusts from 900mm to 1600mm. The 800mm one-piece boom arm locks with a wing nut, so you can angle the mic over a guitar amp, a drum kit or a lectern without the stand tipping. It ends in a standard 3/8" thread, so it takes any mic clip directly, or 5/8" clips with an adaptor. Features Folding tripod base: plastic hub with metal legs Two-piece folding column, height 900mm to 1600mm 800mm one-piece boom arm with wing-nut clamp 3/8" threaded connector Weight 2.35kg Specifications Manufacturer code: 27910-300-55 Height: 900mm to 1600mm Boom arm length: 800mm Thread: 3/8" Colour: black Weight: 2.35kg W Audio 5m XLR Male - XLR Female Microphone Cable A W Audio 5 m balanced microphone cable terminated in a 3-pin male XLR at one end and a 3-pin female XLR at the other. A standard mic lead for stage use, studios, install work and any patching where you need to extend or connect microphones, DI boxes or other balanced line level sources.Key Features3-pin male XLR to 3-pin female XLRBalanced microphone / line cable5 m lengthSuitable for stage, studio and installSpecificationsConnector A3-pin male XLRConnector B3-pin female XLRLength5 m (approximately 16.4 ft)TypeBalanced microphone cableSKUCABL55Show more

from £108.00

1 offer

See all offers