Neutrik

Neutrik NAC3PX-TRUE1 powerCON TRUE1 Panel Mount Chassis Connector, Power In and Out

Name: Neutrik NAC3PX-TRUE1 powerCON TRUE1 Panel Mount Chassis Connector, Power In and Out
Brand: Neutrik

The Neutrik NAC3PX-TRUE1 is a powerCON TRUE1 appliance inlet-outlet combination: a power-in and a power-out receptacle on one panel-mount flange, giving amplifiers, powered speakers, LED fixtures, distribution boxes and rack builds a locking mains input and link-through output. It mounts in an obround panel cut-out (28.8 mm ends, 25.7 mm between centres) with four M3 countersunk screws on a 50 x 24.4 mm pattern, and wires via 6.35 mm (1/4 inch) FASTON flat tabs.powerCON TRUE1TRUE1 is a true mains connector rated for connection and disconnection under load, with a secure locking mechanism. It is not cross-mateable with the original powerCON (blue/grey) range.FeaturesPower-in and power-out receptacles on one panel-mount flangeObround cut-out, 4 x M3 screws (50 x 24.4 mm pattern)Rated for connection and disconnection under loadSecure locking latch prevents accidental disconnectionIdeal for amplifiers, powered speakers and distributionGenuine Neutrik build quality for touring and installNotepowerCON TRUE1 is not cross-mateable with the original powerCON (NAC3 blue/grey) series. Confirm which system your equipment uses before ordering.SpecificationsTypepowerCON TRUE1 appliance inlet-outlet combination (power in + power out), panel mountModelNAC3PX-TRUE1Chassis cut-outObround, 28.8 mm ends at 25.7 mm centres; 4 x M3 (50 x 24.4 mm)ManufacturerNeutrikShow more

from £17.00

1 offer

See all offers