Lab Gruppen

Lab Gruppen LUCIA 60/2M Compact Matrix Amplifier with DSP, 2 x 30W, 4 x 4 Mix Matrix, Half Rack

Name: Lab Gruppen LUCIA 60/2M Compact Matrix Amplifier with DSP, 2 x 30W, 4 x 4 Mix Matrix, Half Rack
Brand: Lab Gruppen

The Lab Gruppen LUCIA 60/2M is the matrix model in the compact LUCIA install range, pairing 2 × 30 W of amplification (full power into 8, 4 or 2 Ω) with a 4 × 4 mix matrix and two balanced line-level outputs. Those line outputs can each feed up to ten further LUCIA amplifiers in parallel, so one 60/2M can act as the mixing and routing hub for a multi-zone system without an external processor. The half-rack 1U chassis ships with a wall-mount bracket for discreet placement wherever the zone needs it. 2 × 30 WInto 8, 4 or 2 Ω 4 × 4Mix matrix 2Balanced line outputs 1UHalf-rack chassis Features Compact matrix amplifier: full output power of 2 × 30 W into 8, 4 or 2 Ω 4 × 4 matrix mixes and routes all inputs to the amplifier channels and two balanced line-level outputs Each line output can drive up to 10 LUCIA devices in parallel Onboard DSP with per-channel high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter Optimised presets for a wide range of loudspeaker models Setup wizard and advanced preset editor for Windows and Mac via USB Automatic Dynamic Loudness Contouring (ADLC) adapts response at any output level Auto Load Sense sets the Voltage Peak Limiter for the connected load Enhanced Bass Profile extends LF response with small loudspeakers Efficient Class-D output stage; Energy Star certified for low running costs Configurable GPIO for wall panels, level control and paging integration; RS232 monitoring Short-circuit, thermal and under-voltage protection for fail-safe operation Wall-mount bracket supplied; rackmount, pole-mount and wall panel kits available Temperature-controlled fan stays silent at idle and low output levels Designed and engineered in Sweden Specifications Amplifier channels2 Max total output (all channels driven)60 W Output per channel30 W into 2, 4 or 8 Ω; 15 W into 16 Ω Max output voltage / current per channel21.9 V peak / 3.9 Arms THD60 dBA at 1 kHz Frequency response5 Hz to 22 kHz Input impedance / CMR10 kΩ / 40 dB Input sensitivity4 dBu balanced; -2 dBu RCA ConnectorsBalanced 3-pin screw-terminal inputs, 2-pin screw-terminal speaker outputs, balanced 3-pin screw-terminal line outputs (ch 3 & 4) Control2 × GPI, RS232, USB for configuration and firmware Processing4 EQ sections per input and output, 4-in/4-out mix matrix, look-ahead limiter, ADLC LatencyUser adjustable, 9.15 to 137 ms Mains supply100-240 V AC nominal (85-265 V operating), IEC inlet Dimensions (W × H × D)216 × 44 × 280 mm (half-rack, 1U)Show more

from £437.00

1 offer

See all offers