
Ecler
Ecler VIDA24Q Smart DSP Amplifier, 4 Channel, 2400W Shared, Dante and AES67, 70V and 100V, 2U
The Ecler VIDA24Q is a four-channel Class D amplifier with a total of 2400W that can be shared unevenly between outputs, giving 4x 600W with all channels driven or up to 2400W on one channel. Each output is set to 2, 4 or 8 ohms or to a 70V or 100V line, and the unit adds Dante/AES67, a DSP matrix, a microSD player and scheduling, all set from a web browser. It suits larger zoned systems in bars, hotels, retail, gyms, offices, schools and places of worship. 2400WTotal, shared4x 600WAll channels driven4 x 4Dante/AES67 I/O2URack height Power sharing2400W is the total for the unit. With all four channels driven equally each output gives 600W; a single channel can take up to 2400W into 4 ohms or at 100V. Dante/AES67 inputsEcler states that Dante/AES67 input support requires firmware v1.02 or later. FeaturesFour amplified outputs sharing 2400W through Ecler VersaPower, so power can be split unevenly between channelsEach output set independently to 2, 4 or 8 ohms, 70V or 100V4 balanced analogue inputs and 4 Dante/AES67 network inputs2 balanced auxiliary line outputs and 4 Dante/AES67 network outputsBuilt-in microSD audio player and signal generatorInternal matrix with input and output DSP: noise gate, high-pass filter, frequency shifter, compressor, delay, parametric and graphic EQ, limitersPriority and backup signal handling, presets, scheduled calendar events4 GPI (0 to 10V), 4 GPO relay contacts and external muteConfigured from the embedded web application; end-user control from iOS, Android and web appsPer-channel auto standby and low-consumption sleep mode; works with EclerCLOUD remote monitoring SpecificationsInputs4 analogue (3-pin Euroblock, balanced), 4 Dante/AES67, microSD player, signal generatorOutputs4 amplified, 2 auxiliary line (3-pin Euroblock, balanced), 4 Dante/AES67Output power, all channels driven600W per channel into 8, 4 or 2 ohms, or at 100V/70VOutput power, single channel (VersaPower)Up to 2400W into 4 ohms or at 100V; 2000W at 70V; 1600W into 2 ohms; 1400W into 8 ohmsAmplifier technologyClass DVoltage gain28 to 40 dBInput sensitivity-6 to +6 dBV (0.5 to 2 Vrms)Input impedance>24 kohmMaximum input level+18 dBV (+20.2 dBu)Frequency response15 Hz to 25 kHzTHD+N500DSP latency2.8 msNetworkGigabit Ethernet; Dante/AES67 4 Tx / 4 Rx, primary and secondary RJ-45Local storagemicroSD (SDXC) up to 2 TB; mp3, ogg, WAV, FLAC, AIFFControl I/O4x GPI (0 to 10V), 4x GPO (NO/NC), external muteMains100 to 240V AC, 50/60 Hz, IEC C14 inlet, PFC >0.96Power draw at 230V1/8 power into 4 ohms: 498W; idle: 72W; standby/sleep: 4.1WEfficiency72%CoolingFan, 53 dB maximumOperating temperature-10 to 50°CDimensions (W x H x D)482.6 x 88 x 410 mm, 2U rackWeight9.3 kgShow more
Offer
All prices incl. VAT; shipping costs per shop feed. The click takes you directly to the shop's product page.
Price history (lowest price)
Price alert
Let me know when this item drops in price.
Product details
- Brands
- Ecler
- Categories
- Electronics > Audio > Audio Components > Power & Headphone Amplifiers > Power Amplifiers
Similar products
Cloud CXA2125 Digital Amplifier with DSP and Ethernet, 2 x 125W 100V or 4 x 60W Low Impedance, Half Rack 1U1 offerfrom £911.00
Linea Research 44C10 4 Channel Installation Power Amplifier, 4 x 2500W, DSP, 2U Rack1 offerfrom £4,103.00
Biamp Voltera D 2400.8 Class D Power Amplifier with DSP, 8 x 300W at 4 Ohm, 1U1 offerfrom £5,513.00
Dynacord IX60:8 Networked DSP Power Amplifier, 8 x 600W, Dante, 8 Mic and Line Inputs, 1U1 offerfrom £3,887.00
Dynacord IX30:8 Networked DSP Power Amplifier, 8 x 375W, Dante, 8 Mic and Line Inputs, 1U1 offerfrom £3,455.00
Dynacord V600:2 powerTANK Install Amplifier, 2 x 300W, 4 or 8 Ohm, 70V or 100V Line, Half Rack 1U1 offerfrom £791.00