CYP

CYP AU-DTI4-TX Dante Transmitter, 4 Balanced Mono Inputs, 48V Phantom Power, PoE Powered

Name: CYP AU-DTI4-TX Dante Transmitter, 4 Balanced Mono Inputs, 48V Phantom Power, PoE Powered
Brand: CYP

The AU-DTI4-TX puts four analogue audio channels onto a Dante network from a single PoE-powered box. Each balanced input on a 3-pin terminal block has adjustable pre-gain, a mute and switchable phantom power (off, 5V or 48V), so microphones and line sources can both be connected. It suits adding local inputs at a lectern, meeting room or stage position where one Cat5e or Cat6 run to the switch replaces analogue multicore. 4Balanced inputs 48VPhantom power PoE802.3af power ~1msTypical latency PoE switch and Dante software neededThe AU-DTI4-TX is powered only by PoE (802.3af) from the network switch, with no local power input listed. Basic setup needs a serial over USB connection, and audio routing is done in third-party Dante control software. Features Four balanced analogue mono inputs on 3-pin terminal blocks Adjustable pre-gain and mute on every input Phantom power per input: off, 5V or 48V Dante output on a standard RJ45 network port Powered by PoE (802.3af) from the network switch Low latency, typically around 1ms Setup via serial over USB, routing via Dante control software Specifications BrandCYP ModelAU-DTI4-TX Inputs4x balanced analogue mono (3-pin terminal block) Network1x RJ45 Dante Service portUSB Micro Max input level4Vrms Input impedance42.3kΩ Phantom powerOff, 5V or 48V LatencyTypically around 1ms PowerPoE (802.3af) Power consumption6W ChassisAluminium, black Dimensions128 x 25 x 108mm (W x H x D) Weight360gShow more

from £256.00

1 offer

See all offers