Aviom

Aviom RCI Pro64 Remote Control Interface for MCS Mic Preamp Control, 1U Rack

Name: Aviom RCI Pro64 Remote Control Interface for MCS Mic Preamp Control, 1U Rack
Brand: Aviom

The Aviom RCI Remote Control Interface connects an MCS Mic Control Surface to a Pro64 network, allowing remote control of 6416m and AllFrame mic preamps from anywhere on the network. It also works as a single-channel monitor station, with a headphone output and a balanced XLR line output that can follow any network slot. It is used at FOH, monitor and broadcast positions in Pro64 snakes and audio networks. 64Preamp channels controlled4Control GroupsXLR + 1/4"Monitor outputs1URack height Use with the MCSPreamp remote control needs an MCS Mic Control Surface (sold separately) connected to the RCI. Any number of RCIs can be fitted for multiple control points. Pro64 systemThis is a Pro64 A-Net device. It works with other Pro64 products (6416 modules, AllFrame, MH10/MH10f, RCI/MCS). Pro16 personal mixers and Pro16 output modules connect to a Pro64 network through an ASI A-Net Systems Interface. FeaturesNetwork interface for the MCS Mic Control SurfaceOne RCI and MCS control up to 64 mic preamp channels anywhere on the networkControl Groups divide control among up to four simultaneous usersMonitor any active Pro64 slot on headphones or a balanced XLR line outputMonitor selection can follow the MCSMCS can be connected and disconnected without affecting the networkBackup DC power inlet on 4-pin XLR SpecificationsController portEtherCon RJ45, for MCSHeadphone output1/4" TRS, mono, with level controlMonitor outputXLR, balanced, mono; +4 dBu or -17 dBu (pad switch)A-Net2x EtherCon RJ45; 120 m (400 ft) between devicesPower100 to 240 V AC, 50/60 Hz, 16 W, IEC inletBackup DC power24 V DC ±5%, 0.55 A typical, 1 A max, 4-pin XLRMaximum ambient temperature50°CDimensions (W x D x H)482.6 x 203 x 44 mm, 1UWeight3.17 kgShow more

from £1,540.00

1 offer

See all offers