Ampetronic

Ampetronic C10-1N Networked Perimeter Hearing Loop Driver, 10A RMS, 1U Rack

Name: Ampetronic C10-1N Networked Perimeter Hearing Loop Driver, 10A RMS, 1U Rack
Brand: Ampetronic

The Ampetronic C10-1N is a networked, single-output perimeter hearing loop driver delivering 10 A RMS of loop current from a 1U rack unit. Network control lets installers and facilities teams adjust the driver remotely, monitor loop resistance and induction, and receive fault alerts by email. It suits larger single spaces such as lecture theatres, theatres, conference rooms, sports halls and transport concourses, where a system needs to meet BS EN 60118-4 field strength. 10 A RMSLoop current1URack heightNetworkControl and monitoring4.2 kgWeight Metal loss correctionMLC corrects the frequency response tilt caused by metal in the building. It does not make up the overall signal loss, which can be large, so loops in steel-framed buildings still need a proper design. FeaturesSingle loop output, 10 A RMS (14.1 A peak) at 1 kHzEthernet control via hosted web server, Telnet and SNMPRemote monitoring of driver status, loop resistance and induction, with fault alerts by email or TelnetPriority input option and custom dual-slope metal loss correction (network models)Two balanced mic/line inputs with switchable 24V phantom power, plus a 100V line inputStatus relay that opens on fault, for connection to building management or alarm panelsCompatible with Loopworks Measure LoopLink for automated driver controlBuilt-in test tones and speech optimised AGCVariable speed fan, front inlet and rear exhaust SpecificationsLoop output current10 A RMS (14.1 A peak), 1 kHz sine; 4.7 A RMS pink noiseOutput voltage33.9V RMS (48V peak)Loop outputs1x 4-pin 5 mm Euroblock (supplied), for twisted pair or star-quad feed cableInputs 1 and 2Balanced mic or line, 3-pin 3.5 mm Euroblock, selected by rear panel switch, switchable 250 Hz low cutMic input200 to 600 ohm, sensitivity -67 dBu, switchable 24V phantom powerLine input sensitivity-42 dBu100V line input (input 2)2-pin 5 mm Euroblock, sensitivity +7 dBuNetworkRJ45 Ethernet, hosted web server, Telnet and SNMPLine outputBalanced, post AGC, 3-pin 3.5 mm EuroblockDC output12V 0.1 A, resettable fuse protected, can follow amplifier statusStatus relayNormally closed isolated contacts, open on fault; 0.5 A at 125V AC, 2 A at 30V DCUSBFirmware updates, or 200 mA power for a wireless routerFrequency response80 Hz to 6.5 kHzDistortionTHD+N 36 dBMetal loss correction0 to 4 dB per octave in 0.25 dB steps, gain constant at 1 kHzPower230V / 120V nominal, 45 to 65 Hz, 70W, mains voltage switchableDimensions (W x D x H)430 x 305 (inc. knob) x 44 mm, 1U 19 inchWeight4.2 kgMountingFreestanding or 1U rack (brackets fitted); wall brackets available separatelyCoolingVariable speed fan, front to rearEnvironmentIP20, 0 to 35°C, 20 to 90% relative humidityShow more

from £1,168.00

1 offer

See all offers