:no_upscale()/WL_HPLC1.jpg)
Welch Materials
Welch Materials HPLC Column Ultisil, XB-CN, 120 Å, 5 μm, 2.1 x 125 mm
Ultisil XB-CN column can be used in either reversed or normal phase. Reversed phase CN column has special selectivity for polar compounds, and due to its low hydrophobicity, elution of hydrophobic molecules is fast. Furthermore, XB-CN column shows perfect peak shape for strong basic analytes (including quaternary ammonium salts). Polarity of XB-CN column is the strongest among all reversed columns. It is a good choice for compounds that are strongly retained on standard reversed columns. Normal phase CN column can replace SiO2 column. Equilibrium of normal phase column is fast, and the silica surface activity is better than that of silica column. To prolong column life time, alternation between reversed phase and normal phase uses should be avoided. While XB-CN column can be used in either reversed or normal phase, elution sequence is different in different separation mode.Näytä lisää
Tarjous
Kaikki hinnat sis. alv:n; toimituskulut kaupan syötteen mukaan. Klikkaus vie suoraan kaupan tuotesivulle.
Hintakehitys (alin hinta)
Hintahälytys
Ilmoita minulle, kun tämän tuotteen hinta laskee.
Tuotetiedot
- Merkit
- Welch Materials
- Kategoriat
- Liiketoiminta ja teollisuus > Tutkimus- ja laboratoriotuotteet > Laboratoriotarvikkeet
Samankaltaisia tuotteita
Altmann Analytik HPLC Column Reprosil 80 SCX, 5.0 μm, 4.6 x 200 mm, Propyl-Sulfogr., strong cation exchanger1 tarjousalk. 410,00 €
Grom HPLC Column GromSil 80 Amino-1 PR (Aminopropyl), 5 μm 100 x 3 mm1 tarjousalk. 375,00 €
Merck HPLC Column LiChrospher 100 RP-8, 5μm, HIBAR RT 250x4mm1 tarjousalk. 3 900,00 €
Altmann Analytik HPLC Column Reprosil Pur Basic 100 Si, 3.0 μm, 3 x 30 mm1 tarjousalk. 250,00 €
Altmann Analytik GC Retention Gap DPTMDS 20 m x 0.53 mm, DPTMDS Deactivated High Temperature Fused Silica Retention Gap / Precolumn1 tarjousalk. 307,20 €
Agilent Technologies GC Column 5 cg HP-1 15m, 0.53mm, 3.0μm E in the P/N designates a 5 or 13cm column cage diameter required for n1 tarjousalk. 590,00 €