STEINEL

STEINEL RS 200 C 078775 LED wall and ceiling light anthracite 3000 K Bluetooth without sensor

Name: STEINEL RS 200 C 078775 LED wall and ceiling light anthracite 3000 K Bluetooth without sensor
Brand: STEINEL

STEINEL RS 200 C is a round LED wall and ceiling light with an anthracite aluminium housing and an opal plastic cover. Its luminous ring surrounds a dark centre, while the shallow body gives it a restrained, modern profile. Article 078775 is the Bluetooth version without its own motion detector, rather than the sensor-equipped RS 200 SC. A shallow fitting for two mounting positionsThe body measures 263 mm in diameter and 53 mm in height. Compare those dimensions with the available wall or ceiling area and the position of the electrical supply before choosing its location. There is no suspension drop or projecting arm to accommodate: the circular body stays close to the mounting surface. The ring remains a defining feature in either position.STEINEL specifies indoor use, including stairwells, corridors and ancillary rooms. This makes circulation areas a supported application, rather than relying on a room photograph to suggest a use. Its plain circular geometry, dark housing and opal ring suit modern, minimalist interiors. There is no exposed decorative bulb to select as part of the appearance. Warm white light with no separate bulb to buyThe integrated STEINEL LED system is rated at 17.1 W, with a total luminaire output of 1165 lm and a colour temperature of 3000 K. You do not need to choose a separate bulb or match a lamp base. The light source is non-replaceable, however, which is worth considering when comparing it with fittings that accept replacement lamps. Alongside the main light, it provides effect lighting on the mounting surface. Bluetooth control is not motion detectionBluetooth Mesh supports networking with compatible devices and configuration through the STEINEL Connect app. The main light is adjustable. Wireless connectivity does not mean that this version detects movement independently; a suitable cooperating device needs to be considered if the installation requires sensor-based operation.The fitting uses a 220–240 V mains supply and comes with mounting accessories. Its IP54 and IK10 ratings describe its protection, but do not override the manufacturer's stated indoor application.Näytä lisää

alk. 164,09 €

1 tarjous

Näytä tarjoukset