NORLYS

NORLYS Astrid 2203CB Copper Brown LED Bollard 55 cm DALI2

Name: NORLYS Astrid 2203CB Copper Brown LED Bollard 55 cm DALI2
Brand: NORLYS

NORLYS Astrid 2203CB is a 55 cm outdoor LED bollard in Copper Brown. Its 14 × 14 cm square base and vertical slats give the fitting a defined architectural profile. Light passes through an opal synthetic diffuser, so the visible optical section has a milky appearance.Light and controlThe built-in LED light source is rated at 8.2 W and the luminaire power is 10.6 W. A 2700 K colour temperature provides warm light, while luminaire output is 200 lm. This version uses DALI2 control, which should be included in the installation plan. The LED light source forms part of the fitting.Outdoor installationThe manufacturer specifies IP65 ingress protection and IK10 impact rating for this variant. The bollard is fixed to the ground through three Ø9 mm holes on a Ø65 mm diameter at 120° intervals. Its terminals permit loop-through wiring up to 5 × 2.5 mm². Compare the base footprint and cable route with the prepared location before ordering.Materials and placementThe body is aluminium and the diffuser has an opal finish. Astrid can provide low-level orientation lighting beside a path, entrance, terrace or driveway where a composed light line is wanted near the surface. NORLYS lists ground anchors and adapters separately; the appropriate accessory depends on the substrate. The fitting has protection class I and operates at 220–240 V. NORLYS specifies an ambient-temperature range of −20 to +45 °C, so site conditions should be checked against that range during planning.Näytä lisää

alk. 318,26 €

1 tarjous

Näytä tarjoukset